| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.10 INCH-OUNCES NOMINAL |
| BODY STYLE | STANDARD ROUND A |
| BODY SIZE | 8 |
| COMPENSATION METHOD | WINDING COMPENSATED |
| COMPENSATOR DC RESISTANCE IN OHMS | 390.00 NOMINAL |
| COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 1.005 ROTOR TO COMPENSATOR MINIMUM AND 1.020 ROTOR TO COMPENSATOR MAXIMUM |
| FLANGE DIAMETER | 0.7490 INCHES MINIMUM AND 0.7600 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 1.5280 INCHES NOMINAL |
| MATERIAL | STEEL CORROSION RESISTING BODY |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.3160 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 17.000 OUTPUT TO INPUT NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PLUS J ZRS REACTANCE IN OHMS | 180.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 930.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 350.00 NOMINAL |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.2120 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 295.00 NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 10 WIRE LEAD |
| TRANSFORMATION RATIO | 1.010 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 0.6870 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ZRS RESISTANCE IN OHMS | 650.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 340.00 NOMINAL |