| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS MAXIMUM |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8120 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.1120 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 4 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 11 |
| BODY STYLE | STANDARD ROUND C |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| FLANGE DIAMETER | 1.0520 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.0620 INCHES NOMINAL SHOULDER |
| MAXIMUM TEMP RISE | 30.0 CELSIUS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 40.00 |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 4.500 INPUT TO OUTPUT NOMINAL |
| PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 118.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 11.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 20.00 NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7680 INCHES MAXIMUM |
| OVERALL LENGTH | 2.1430 INCHES NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 8.50 NOMINAL |
| ROTOR INPUT CURRENT RATING | 280.0 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 1.4 WATTS MAXIMUM |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.3750 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0310 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0310 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 3.50 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TORQUE GRADIENT PER ANGULAR DEG | 3000.0 MILLIMETER-MILLIGRAMS MINIMUM |
| TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| ZRO RESISTANCE IN OHMS | 15.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 22.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 4.00 NOMINAL |