5310-00-816-0051 NUT,SPECIAL Index 5905-00-816-0065 RESISTOR,FIXED,WIRE WOUND,NONIND

National Stock Number:
5990-00-816-0052

Federal Supply Class:
5990

National Item Identification Number:
008160052

Description:
RESOLVER,ELECTRICAL

Detail:
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also SYNCHRO (as modified) and GONIOMETER, ELECTRICAL. Excludes TRANSOLVER, ELECTRICAL and potentiometer sine/cosine electrical resolvers.


Manufacturer Information:
CSC8A499932MOOG INC.
CSC8A4L08099932MOOG INC.


Techincal Specification:
FREQUENCY IN HERTZ400.0 NOMINAL
TERMINAL TYPE AND QUANTITY7 WIRE LEAD
BODY STYLESTANDARD ROUND A
BODY SIZE8
STATOR INPUT VOLTAGE RATING IN VOLTS26.0 NOMINAL
STATOR INPUT CURRENT RATING30.0 MILLIAMPERES NOMINAL
STATOR INPUT ELECTRICAL POWER RATING230.0 MILLIWATTS NOMINAL
ROTOR INPUT VOLTAGE RATING IN VOLTS26.0 NOMINAL
ROTOR INPUT CURRENT RATING38.0 MILLIAMPERES NOMINAL
ROTOR INPUT ELECTRICAL POWER RATING230.0 MILLIWATTS NOMINAL
ZRO RESISTANCE IN OHMS270.00 NOMINAL
PLUS J ZRO REACTANCE IN OHMS630.00 NOMINAL
ZSO RESISTANCE IN OHMS250.00 NOMINAL
PLUS J ZSO REACTANCE IN OHMS2760.00 NOMINAL
ZRS RESISTANCE IN OHMS340.00 NOMINAL
PLUS J ZRS REACTANCE IN OHMS67.00 NOMINAL
ROTOR DC RESISTANCE IN OHMS230.00 NOMINAL
STATOR DC RESISTANCE IN OHMS170.00 NOMINAL
PHASE SHIFT ANGLE IN DEG12.000 INPUT TO OUTPUT NOMINAL
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT30.00
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES-7.0 TO 7.0
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS6.0 CENTIMETER-GRAMS NOMINAL
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS3.0 CENTIMETER-GRAMS NOMINAL
PILOT DIAMETER0.4995 INCHES MINIMUM AND
0.5000 INCHES MAXIMUM
OVERALL LENGTH1.6160 INCHES NOMINAL
FLANGE DIAMETER0.7490 INCHES MINIMUM AND
0.7500 INCHES MAXIMUM
FLANGE THICKNESS0.0620 INCHES NOMINAL
UNDERCUT DIAMETER0.6880 INCHES MINIMUM AND
0.6910 INCHES MAXIMUM
UNDERCUT WIDTH0.0620 INCHES NOMINAL
PILOT LENGTH0.0430 INCHES NOMINAL
MOUNTING SURFACE TO TERMINAL END DISTANCE1.2410 INCHES MAXIMUM
SHAFT TYPEROUND, SLOTTED SINGLE SHAFT
SHAFT DIAMETER0.0895 INCHES MINIMUM AND
0.0900 INCHES MAXIMUM SINGLE SHAFT
SHAFT LENGTH0.3750 INCHES NOMINAL SINGLE SHAFT
SHAFT SLOT DEPTH0.0250 INCHES NOMINAL SINGLE SHAFT
SHAFT SLOT WIDTH0.0200 INCHES NOMINAL SINGLE SHAFT
TERMINAL LOCATIONREAR
BODY MATERIALSTEEL, CORROSION RESISTING
THE MANUFACTURERS DATA
MANUFACTURERS CODE99932
DESIGN CONTROL REFERENCECSC8A4


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us