| STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| STATOR INPUT CURRENT RATING | 5.7 MILLIAMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 50.0 MILLIWATTS NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| BODY STYLE | STANDARD ROUND D |
| FREQUENCY IN HERTZ | 500.0 NOMINAL |
| BODY SIZE | 23 |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 13400.00 MINIMUM AND |
| 16700.00 MAXIMUM |
| ZSO IMPEDANCE ANGLE IN DEG | 81.00 MINIMUM AND |
| 84.50 MAXIMUM |
| ZRS IMPEDANCE MAGNITUDE IN OHMS | 1040.00 MINIMUM AND |
| 1260.00 MAXIMUM |
| ZRS IMPEDANCE ANGLE IN DEG | 46.00 MINIMUM AND |
| 56.00 MAXIMUM |
| TRANSFORMATION RATIO | 0.735 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 2.300 INPUT TO OUTPUT NOMINAL |
| MAXIMUM TEMP RISE | 20.0 DEG CELSIUS |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 20.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 45.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| SHOULDER DIAMETER | 1.9900 INCHES NOMINAL |
| PILOT DIAMETER | 0.6000 INCHES NOMINAL |
| SECOND SHOULDER DIAMETER | 1.9995 INCHES NOMINAL |
| SECOND SHOULDER LENGTH | 0.1700 INCHES NOMINAL |
| OVERALL LENGTH | 4.2990 INCHES NOMINAL |
| FLANGE DIAMETER | 2.2500 INCHES NOMINAL |
| FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| BODY DIAMETER | 1.9900 INCHES NOMINAL |
| PILOT LENGTH | 0.0430 INCHES NOMINAL |
| SHOULDER LENGTH | 0.1700 INCHES NOMINAL |
| AFT OF FIRST FLANGE DIAMETER | 1.9995 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.5800 INCHES NOMINAL |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHAFT DIAMETER | 0.2403 INCHES MINIMUM AND |
| 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.7190 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.2900 INCHES MAXIMUM SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 18876 |
| DESIGN CONTROL REFERENCE | 9056158 |