| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 12.0 CENTIMETER-GRAMS NOMINAL |
| BODY SIZE | 8 |
| BODY STYLE | STANDARD ROUND A |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| FLANGE DIAMETER | 0.7450 INCHES MINIMUM AND 0.7530 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 10.000 INPUT TO OUTPUT NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| MATERIAL | STEEL CORROSION RESISTING BODY |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 34.00 OUTPUT |
| MAXIMUM TEMP RISE | 3.0 CELSIUS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 53.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2400 INCHES MAXIMUM |
| OVERALL LENGTH | 1.7080 INCHES MINIMUM AND 1.7140 INCHES MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 420.00 NOMINAL |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT LENGTH | 0.4610 INCHES MINIMUM AND 0.4850 INCHES MAXIMUM SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 105.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 30.0 MILLIAMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 100.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TRANSFORMATION RATIO | 2.203 ROTOR TO STATOR NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.6870 INCHES NOMINAL |
| ZRO IMPEDANCE ANGLE IN DEG | 75.00 NOMINAL |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 430.00 NOMINAL |
| ZSO IMPEDANCE ANGLE IN DEG | 75.00 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 2490.00 NOMINAL |