| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 12 SCREW |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 11 |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 0.5 MINIMUM AND |
| 26.0 MAXIMUM |
| STATOR INPUT CURRENT RATING | 6.5 MILLIAMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 20.0 MILLIWATTS MAXIMUM |
| ZRO RESISTANCE IN OHMS | 440.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 2080.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 385.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 1960.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 530.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 305.00 NOMINAL |
| TRANSFORMATION RATIO | 0.975 ROTOR TO STATOR NOMINAL |
| COMPENSATION METHOD | WINDING COMPENSATED |
| COMPENSATOR DC RESISTANCE IN OHMS | 530.00 NOMINAL |
| COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 0.980 ROTOR TO COMPENSATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 8.500 INPUT TO OUTPUT NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 1.00 INPUT |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 8.0 CENTIMETER-GRAMS NOMINAL |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND |
| 1.0000 INCHES MAXIMUM |
| PILOT DIAMETER | 0.6245 INCHES MINIMUM AND |
| 0.6250 INCHES MAXIMUM |
| OVERALL LENGTH | 2.3080 INCHES MAXIMUM |
| FLANGE DIAMETER | 1.0620 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.9700 INCHES MAXIMUM |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8120 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 4 |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND |
| 0.1247 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.3380 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| ZCO RESISTANCE IN OHMS | 600.00 NOMINAL |
| PLUS J ZCO REACTANCE IN OHMS | 2000.00 NOMINAL |