|
|
|
National Stock Number:
5985-01-111-7769
Federal Supply Class:
5985
National Item Identification Number:
011117769
Description:
ATTENUATOR,VARIABLE
Detail:
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
|
Manufacturer Information:
| M24215/9-003 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-A-24215/9 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-24215/9 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SHAFT | | APPLICATION DESIGN | TRANSMISSION LINE | | ATTENUATION VARIATION METHOD | CONTINUOUS | | BODY STYLE | WAVEGUIDE TYPE | | FREQUENCY RANGE | 7.000 GIGAHERTZ MINIMUM AND 11.000 GIGAHERTZ MAXIMUM | | INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 0.5 | | OVERALL ATTENUATION ACCURACY IN DECIBELS | -1.50 TO 1.50 | | OVERALL ATTENUATION RANGE IN DECIBELS | +0.0 TO 15.0 | | OVERALL HEIGHT | 2.500 INCHES NOMINAL | | OVERALL LENGTH | 2.510 INCHES NOMINAL | | OVERALL WIDTH | 1.004 INCHES NOMINAL | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE(S) | | OPERATING TEMP RANGE | -45.0 TO 110.0 CELSIUS | | SHAFT DIAMETER | 0.500 INCHES NOMINAL | | SHAFT LENGTH | 2.500 INCHES NOMINAL | | SHAFT TYPE | ROUND | | UNTHREADED MOUNTING HOLE DIAMETER | 0.090 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 2 PIN | | TEST DATA DOCUMENT | 81349-MIL-A-24215/9 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|