| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SHAFT |
| APPLICATION DESIGN | AUDIO |
| ATTENUATION PER STEP IN DECIBELS | 1.0 |
| ATTENUATION VARIATION METHOD | STEPPED |
| BODY LENGTH | 2.062 INCHES NOMINAL |
| BODY STYLE | CYLINDRICAL W/REAR TERMINALS |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 1.500 INCHES NOMINAL |
| FREQUENCY RANGE | 0.000 KILOHERTZ MINIMUM AND 20.000 KILOHERTZ MAXIMUM |
| IMPEDANCE RATING IN OHMS | 1000.0 INPUT-OUTPUT |
| OPERATING TEMP RANGE | -55.0 TO 125.0 CELSIUS |
| OVERALL ATTENUATION RANGE IN DECIBELS | +0.0 TO 10.0 |
| OVERALL DIAMETER | 2.344 INCHES NOMINAL |
| OVERALL LENGTH | 3.000 INCHES NOMINAL |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.164 INCHES |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE(S) |
| MOUNTING THREAD QUANTITY | 32 PER INCH |
| POWER RATING | 2.5 WATTS AVERAGE |
| SCHEMATIC DIAGRAM DESIGNATOR | BRIDGED "T" |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT TYPE | ROUND |
| SHAFT LENGTH | 0.938 INCHES NOMINAL |
| STEP POSITION QUANTITY | 10 |
| TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 82343-48453-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |