| STYLE DESIGNATOR | OFFSET BEND TYPE |
| CROSS-SECTIONAL SHAPE STYLE | INTERNAL, RECTANGULAR EXTERNAL, RECTANGULAR |
| TUBING WALL CONSTRUCTION STYLE | SEAMLESS SINGLE TUBING SEGMENT |
| FLANGE QUANTITY | 2 |
| FLANGE CONNECTING FACILITY AND QUANTITY | 4 THREADED HOLE FIRST FLANGE SINGLE CONNECTION FACILITY |
| 4 UNTHREADED HOLE SECOND FLANGE SINGLE CONNECTION FACILITY |
| FLANGE STYLE | CHOKE TYPE FIRST FLANGE |
| COVER TYPE SECOND FLANGE |
| FLEXIBILITY | RIGID SINGLE TUBING SEGMENT |
| MATERIAL | ALUMINUM ALLOY SINGLE TUBING SEGMENT |
| WAVEGUIDE LENGTH | 5.775 INCHES MINIMUM AND |
| 5.805 INCHES MAXIMUM |
| WAVEGUIDE CENTER TO CENTER DISTANCE | 3.985 INCHES MINIMUM AND |
| 4.015 INCHES MAXIMUM |
| WAVEGUIDE OUTSIDE WIDTH | 0.996 INCHES MINIMUM AND |
| 1.004 INCHES MAXIMUM |
| WAVEGUIDE INSIDE WIDTH | 0.896 INCHES MINIMUM AND |
| 0.904 INCHES MAXIMUM |
| WAVEGUIDE INSIDE HEIGHT | 0.396 INCHES MINIMUM AND |
| 0.404 INCHES MAXIMUM |
| WAVEGUIDE OUTSIDE HEIGHT | 0.496 INCHES MINIMUM AND |
| 0.504 INCHES MAXIMUM |
| BEND ANGLE IN DEG | 90.0 FIRST BEND H-PLANE |
| 90.0 SECOND BEND E-PLANE |
| 90.0 THIRD BEND H-PLANE |
| 60.0 FOURTH BEND E-PLANE |
| 60.0 FIFTH BEND E-PLANE |
| SURFACE TREATMENT | ALUMINUM ALL TUBING SEGMENT AND FLANGE INSIDE SURFACES |
| OXIDE FILM ALL TUBING SEGMENT AND FLANGE OUTSIDE SURFACES |
| FLANGE INSIDE WIDTH | 0.897 INCHES MINIMUM AND |
| 0.903 INCHES MAXIMUM FIRST FLANGE |
| 1.003 INCHES MINIMUM AND |
| 1.006 INCHES MAXIMUM SECOND FLANGE |
| FLANGE INSIDE HEIGHT | 0.397 INCHES MINIMUM AND |
| 0.403 INCHES MAXIMUM FIRST FLANGE |
| 0.503 INCHES MINIMUM AND |
| 0.506 INCHES MAXIMUM SECOND FLANGE |
| FLANGE OUTSIDE WIDTH | 1.610 INCHES MINIMUM AND |
| 1.640 INCHES MAXIMUM FIRST FLANGE |
| 1.610 INCHES MINIMUM AND |
| 1.640 INCHES MAXIMUM SECOND FLANGE |
| FLANGE OUTSIDE HEIGHT | 1.610 INCHES MINIMUM AND |
| 1.640 INCHES MAXIMUM FIRST FLANGE |
| 1.610 INCHES MINIMUM AND |
| 1.640 INCHES MAXIMUM SECOND FLANGE |
| FLANGE DEPTH | 0.423 INCHES MINIMUM AND |
| 0.453 INCHES MAXIMUM FIRST FLANGE |
| 0.422 INCHES MINIMUM AND |
| 0.453 INCHES MAXIMUM SECOND FLANGE |
| FLANGE CONNECTING HOLE DIAMETER | 0.169 INCHES NOMINAL SECOND FLANGE SINGLE CONNECTION FACILITY |
| THREAD SERIES DESIGNATOR | UNC FIRST FLANGE SINGLE CONNECTION FACILITY |
| NOMINAL THREAD SIZE | 0.164 INCHES FIRST FLANGE SINGLE CONNECTION FACILITY |
| THREAD CLASS | 2B FIRST FLANGE SINGLE CONNECTION FACILITY |
| THREAD DIRECTION | RIGHT-HAND FIRST FLANGE SINGLE CONNECTION FACILITY |
| MAXIMUM OPERATING PRESSURE | 20.0 POUNDS PER SQUARE INCH GAGE |
| INSERTION LOSS IN DECIBELS | 0.10 |
| VOLTAGE STANDING WAVE RATIO | 1.14 |
| SPECIAL FEATURES | MTG. BRACKET 2.000 IN. LG. BY 1.750 IN. W. AND 0.063 IN. THK.,4 PANEL FASTENER ASSEMBLIES PRESSED INTO BRACKET ON 1.562 IN. PORM 0.010 IN. MTG. CENTERS,BRACKET LOCATED 0.750 IN. FROM CENTER OF SHORT LEG ON E-PLANE SECTION AFTER SECOND 90 DEG. BEND,TUBING WALL CONSTRUCTION CAN ALSO BE LAMINATED |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 10001 |
| DESIGN CONTROL REFERENCE | 2575980 |