|
|
|
National Stock Number:
5977-01-116-4730
Federal Supply Class:
5977
National Item Identification Number:
011164730
Description:
BRUSH,ELECTRICAL CONTACT
Detail:
AN ITEM SPECIFICALLY DESIGNED TO BE USED IN THE TRANSFER OF ELECTRICAL ENERGY TO OR FROM ANOTHER CONDUCTING SURFACE. EITHER THE BRUSH OR THE SURFACE IS CONTINUALLY MOVING DURING THE TRANSFER OF ENERGY. THE BRUSH IS USUALLY COMPOSED IN PART OF SOME FORM OF THE ELEMENT CARBON. INCLUDES: (1) A SINGLE BRUSH EITHER WITH OR WITHOUT AN ATTACHED SHUNT (FLEXIBLE WIRE LEAD) AND/OR A HELICAL OR FLAT TYPE PRESSURE SPRING; (2) A SPLIT BRUSH COMPOSED OF TWO OR MORE PIECES (WAFERS), WHICH ARE USED IN PLACE OF ONE BRUSH USUALLY CONNECTED TOGETHER BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL; (3) PAIRED BRUSHES COMPOSED OF TWO IDENTICAL OR NON-IDENTICAL BRUSHES CONNECTED TOGETHER BY A COMMON SHUNT EITHER WITH OR WITHOUT PRESSURE SPRINGS OR CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE EITHER WITH OR WITHOUT INDIVIDUAL SHUNTS; (4) MULTIPLE BRUSHES COMPOSED OF MORE THAN TWO IDENTICAL OR NON-IDENTICAL BRUSHES WITHOUT PRESSURE SPRINGS CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE BY INDIVIDUAL SHUNTS. DOES NOT INCLUDE MOVING CONTACTS WHICH MAKE AND SLIDE PAST STATIONARY CONTACTS, BUT ARE STATIONARY WHILE THE CIRCUIT IS CONDUCTING, SUCH AS THE SLIDING CONTACTS ON A RHEOSTAT OR THE STATIONARY CONTACT ON A SYNCHRO. EXCLUDES: CONTACT, ELECTRICAL; AND CONTACT ASSEMBLY, ELECTRICAL.
|
Manufacturer Information:
| 1946484 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 1946984 | 7X677 | GENERAL MOTORS LLC | | SAW-11164730 | 1Y875 | SOUTHERN AUTOMOTIVE WHOLESALERS, INC |
|
Techincal Specification:
| BASIC SHAPE STYLE | UNTHREADED SINGLE THROUGH HOLE | | BEVEL DEPTH | 0.280 INCHES NOMINAL | | BEVEL LENGTH | 0.230 INCHES NOMINAL | | BODY STYLE | RECTANGULAR COMMUTATOR | | CONTACT FACE STYLE | FLAT | | DISTANCE FROM BRUSH TOP TO HOLE CENTERLINE | 0.160 INCHES NOMINAL | | DISTANCE FROM CENTER OF HOLE TO OUTSIDE EDGE | 0.320 INCHES NOMINAL | | HOLE DIAMETER | 0.197 INCHES MINIMUM AND 0.203 INCHES MAXIMUM | | LENGTH | 0.750 INCHES NOMINAL | | MATERIAL | METAL GRAPHITE | | SPECIAL FEATURES | LG OF TOP LEFT BEVEL 0.120 IN. | | STYLE DESIGNATOR | ONE PIECE | | THICKNESS | 0.380 INCHES NOMINAL | | TOP STYLE | FLAT WITH LEFT AND RIGHT EDGE BEVELED | | WIDTH | 0.660 INCHES NOMINAL |
|
|