|
|
|
National Stock Number:
5977-00-874-5647
Federal Supply Class:
5977
National Item Identification Number:
008745647
Description:
BRUSH,ELECTRICAL CONTACT
Detail:
AN ITEM SPECIFICALLY DESIGNED TO BE USED IN THE TRANSFER OF ELECTRICAL ENERGY TO OR FROM ANOTHER CONDUCTING SURFACE. EITHER THE BRUSH OR THE SURFACE IS CONTINUALLY MOVING DURING THE TRANSFER OF ENERGY. THE BRUSH IS USUALLY COMPOSED IN PART OF SOME FORM OF THE ELEMENT CARBON. INCLUDES: (1) A SINGLE BRUSH EITHER WITH OR WITHOUT AN ATTACHED SHUNT (FLEXIBLE WIRE LEAD) AND/OR A HELICAL OR FLAT TYPE PRESSURE SPRING; (2) A SPLIT BRUSH COMPOSED OF TWO OR MORE PIECES (WAFERS), WHICH ARE USED IN PLACE OF ONE BRUSH USUALLY CONNECTED TOGETHER BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL; (3) PAIRED BRUSHES COMPOSED OF TWO IDENTICAL OR NON-IDENTICAL BRUSHES CONNECTED TOGETHER BY A COMMON SHUNT EITHER WITH OR WITHOUT PRESSURE SPRINGS OR CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE EITHER WITH OR WITHOUT INDIVIDUAL SHUNTS; (4) MULTIPLE BRUSHES COMPOSED OF MORE THAN TWO IDENTICAL OR NON-IDENTICAL BRUSHES WITHOUT PRESSURE SPRINGS CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE BY INDIVIDUAL SHUNTS. DOES NOT INCLUDE MOVING CONTACTS WHICH MAKE AND SLIDE PAST STATIONARY CONTACTS, BUT ARE STATIONARY WHILE THE CIRCUIT IS CONDUCTING, SUCH AS THE SLIDING CONTACTS ON A RHEOSTAT OR THE STATIONARY CONTACT ON A SYNCHRO. EXCLUDES: CONTACT, ELECTRICAL; AND CONTACT ASSEMBLY, ELECTRICAL.
|
Manufacturer Information:
| 10411 | 18783 | MIRAJ CORP | | 1102025 | 64547 | HONEYWELL INTERNATIONAL, INC | | 26C160 | 03494 | AMETEK ADVANCED INDUSTRIES, INC. | | 26C160P01 | 0AHP6 | NATIONAL ELECTRICAL CARBON PRODUCTS, INC. | | 26C160P01 | 34990 | NATIONAL ELECTRICAL CARBON PRODUCTS INC EAST STROUDSBURG-PA | | 1102025 | 83298 | ALLIED SIGNAL INC AEROSPACE EQUIPMENT SYSTEMS EATONTOWN SITE |
|
Techincal Specification:
| BODY STYLE | RECTANGULAR SLIP RING | | BRUSH SHUNT LENGTH | 1.250 INCHES MINIMUM AND 1.376 INCHES MAXIMUM SINGLE SHUNT | | CONTACT FACE STYLE | CONCAVE | | LENGTH | 0.562 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | NATIONAL GRADE T462 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | CARBON | | RADIUS | 0.625 INCHES NOMINAL | | SHUNT INSULATION PROVISION AND QUANTITY | 1 UNINSULATED | | SHUNT POSITION DESIGNATOR | 8 | | STYLE DESIGNATOR | ONE PIECE | | TERMINAL SLOT WIDTH | 0.165 INCHES MINIMUM AND 0.175 INCHES MAXIMUM | | TERMINAL TYPE AND QUANTITY | 1 STRAIGHT W/HOLE | | THICKNESS | 0.250 INCHES NOMINAL | | TOP STYLE | FLAT WITH RIGHT EDGE BEVELED | | WIDTH | 0.156 INCHES NOMINAL |
|
|