|
|
|
National Stock Number:
5970-01-433-1615
Federal Supply Class:
5970
National Item Identification Number:
014331615
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| 16-4051 | 27192 | DRS NAVAL POWER SYSTEMS INC | | 58-6027PC122 | 27192 | DRS NAVAL POWER SYSTEMS INC | | LO-014331615 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | ZZZY | | INSIDE DIAMETER | 0.117 INCHES MINIMUM AND 0.120 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.350 INCHES NOMINAL | | OVERALL HEIGHT | 0.020 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-15037, TYPE GME MIL SPEC SINGLE MATERIAL RESPONSE OR ERR-060 OVERALL | | MATERIAL | PLASTIC MELAMINE AND GLASS OVERALL | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP. | | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO-014331615. | | STYLE DESIGNATOR | ROUND, FLAT |
|
|