|
|
|
National Stock Number:
5970-01-251-1330
Federal Supply Class:
5970
National Item Identification Number:
012511330
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| 5622-47-7 | 86928 | SEASTROM MANUFACTURING CO INC |
|
Techincal Specification:
| INSIDE DIAMETER | 0.381 INCHES MINIMUM AND 0.391 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM | | OVERALL HEIGHT | 0.007 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-I-631, TYPE G, FORM S, GRADE A, CLASS 2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | PCY000 OVERALL | | STYLE DESIGNATOR | ROUND, FLAT |
|
|