|
|
|
National Stock Number:
5970-01-093-2101
Federal Supply Class:
5970
National Item Identification Number:
010932101
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| 2318-T141 | 1YGB8 | CAREY MANUFACTURING CO, INC | | 610137P1 | 94117 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. | | W1-61FP | 04729 | UNICORP. | | SP-IS-002-1 | 57230 | GOULD INC SIMULATION SYSTEMS DIV |
|
Techincal Specification:
| INSIDE DIAMETER | 0.144 INCHES NOMINAL | | OUTSIDE DIAMETER | 0.313 INCHES NOMINAL | | OVERALL HEIGHT | 0.062 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-15035, TYPE FBI-CANCELLED/REPLACED BY MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-I-24768/15 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | PLASTIC PHENOLIC AND COTTON OVERALL | | STYLE DESIGNATOR | ROUND, FLAT |
|
|