|
|
|
National Stock Number:
5970-01-036-8523
Federal Supply Class:
5970
National Item Identification Number:
010368523
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| S8157AW316-032 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| INSIDE DIAMETER | 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.240 INCHES MINIMUM AND 0.245 INCHES MAXIMUM | | OVERALL HEIGHT | 0.032 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-18177, TYPE GEB MIL SPEC 1ST MATERIAL RESPONSE OR MIL-I-24768/3 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-P-18177, TYPE GEE MIL SPEC 2ND MATERIAL RESPONSE OR MIL-I-24768/2 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | PLASTIC EPOXY AND GLASS FIBER OR PLASTIC EPOXY AND FIBERGLASS OVERALL | | SPECIAL FEATURES | 125 MICROINCH FINISH OVERALL | | STYLE DESIGNATOR | ROUND, FLAT |
|
|