|
|
|
National Stock Number:
5970-00-404-0600
Federal Supply Class:
5970
National Item Identification Number:
004040600
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| 293206 | 60119 | MONADNOCK COMPANY, THE |
|
Techincal Specification:
| INSIDE DIAMETER | 0.196 INCHES MINIMUM AND 0.203 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.531 INCHES NOMINAL | | OVERALL HEIGHT | 0.020 INCHES NOMINAL | | SPECIAL FEATURES | 0.156 IN. WIDE,0.062 IN. HIGH TAB LOCATED ON OUTSIDE EDGE | | STYLE DESIGNATOR | ROUND, FLAT | | SURFACE TREATMENT AND LOCATION | OVERALL ANODIZED,MIL-A-8625,TYPE III,CLASS 1 |
|
|