|
|
|
National Stock Number:
5970-00-173-2349
Federal Supply Class:
5970
National Item Identification Number:
001732349
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| 10545613 | 19200 | US ARMY ARDEC RDECOM | | 5970001732349 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5970001732349 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| INSIDE DIAMETER | 0.256 INCHES MINIMUM AND 0.271 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM | | OVERALL HEIGHT | 0.140 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-F-1148, GRADE CH MIL SPEC 1ST MATERIAL RESPONSE OR ASTM D710 ASSN STD 1ST MATERIAL RESPONSE OR MIL-P-79, TYPE PBE MIL SPEC 2ND MATERIAL RESPONSE OR MIL-I-24768/10 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | PAPER OR PAPER AND PLASTIC PHENOLIC OVERALL | | SPECIAL FEATURES | THICKNESS TAPERED FROM 0.140 IN. TO 0.084 IN. | | STYLE DESIGNATOR | ROUND, FLAT |
|
|