|
|
|
National Stock Number:
5965-00-280-3808
Federal Supply Class:
5965
National Item Identification Number:
002803808
Description:
LOUDSPEAKER,PERMANENT MAGNET
Detail:
A loudspeaker whose diaphragm movements are produced by a coil or iron armature moving in the field of a permanent magnet.
|
Manufacturer Information:
| 8T8-1 | 77196 | PERMOFLUX DIV OF DX RADIO AND TV SERVICE | | LS-180/U | 80058 | JOINT ELECTRONICS TYPE DESIGNATION SYSTEM | | SC-B-27469 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | M10911/3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-L-10911 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 5.437 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 5.437 INCHES NOMINAL | | FREQUENCY RESPONSE RANGE IN HERTZ | +150.0 TO 7000.0 | | FREQUENCY RESPONSE TOLERANCE IN DECIBELS | -5.0 TO 5.0 | | IMPEDANCE RATING IN OHMS | 7.0 VOICE COIL MINIMUM AND 9.0 VOICE COIL MAXIMUM | | INSTALLATION DESIGN | NONPORTABLE | | POWER RATING | 5.00 WATTS NORMAL AND 10.00 WATTS PEAK | | MOUNTING FACILITY QUANTITY | 4 | | MOUNTING SLOT LENGTH | 0.372 INCHES MINIMUM AND 0.378 INCHES MAXIMUM | | MOUNTING METHOD | SLOT | | OVERALL DEPTH | 5.000 INCHES MAXIMUM | | OVERALL LENGTH | 7.690 INCHES NOMINAL | | OVERALL WIDTH | 7.625 INCHES NOMINAL | | STYLE DESIGNATOR | PIN CUSHION | | TERMINAL QUANTITY | 2 | | TERMINAL TYPE | TAB, SOLDER LUG | | TEST DATA DOCUMENT | 81349-MIL-L-10911 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | TRANSDUCER DIAMETER | 6.0 INCHES NOMINAL | | TRANSDUCER TYPE | CONE | | USAGE DESIGN | INDOOR |
|
|