|
|
|
National Stock Number:
5962-01-252-4839
Federal Supply Class:
5962
National Item Identification Number:
012524839
Description:
MICROCIRCUIT,DIGITAL
Detail:
A microcircuit specifically designed to generate, modify, or process electrical signals which operate with two distinct or binary states. These states are commonly referred to as on and off, true and false, high and low, or 1 and 0.
|
Manufacturer Information:
| 86027 | 67268 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (STANDARD MICROCIRCUIT | | 8602701XA | 67268 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (STANDARD MICROCIRCUIT | | AM2909A/BXA | 34335 | ADVANCED MICRO DEVICES INC | | 8602701XB | 67268 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (STANDARD MICROCIRCUIT | | 8602701XX | 67268 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (STANDARD MICROCIRCUIT |
|
Techincal Specification:
| BODY HEIGHT | 0.210 INCHES MAXIMUM | | BODY LENGTH | 1.490 INCHES MAXIMUM | | BODY WIDTH | 0.500 INCHES MINIMUM AND 0.610 INCHES MAXIMUM | | CASE OUTLINE SOURCE AND DESIGNATOR | D-10 MIL-M-38510 | | DESIGN FUNCTION AND QUANTITY | 1 SEQUENCER | | FEATURES PROVIDED | HERMETICALLY SEALED AND BURN IN AND MONOLITHIC AND W/ENABLE AND W/CLOCK | | INCLOSURE CONFIGURATION | DUAL-IN-LINE | | INCLOSURE MATERIAL | CERAMIC | | INPUT CIRCUIT PATTERN | 9 INPUT | | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC | | MAXIMUM POWER DISSIPATION RATING | 770.0 MILLIWATTS | | OPERATING TEMP RANGE | -55.0 TO 125.0 CELSIUS | | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 7.0 VOLTS MAXIMUM POWER SOURCE | | STORAGE TEMP RANGE | -65.0 TO 150.0 CELSIUS | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 28 PRINTED CIRCUIT | | TEST DATA DOCUMENT | 14933-86027 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|