| BODY HEIGHT | 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| BODY LENGTH | 0.896 INCHES MAXIMUM |
| BODY WIDTH | 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| CASE OUTLINE SOURCE AND DESIGNATOR | D-2 MIL-M-38510 |
| FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND W/ENABLE AND PROGRAMMABLE AND PROGRAMMED AND BIPOLAR AND W/BUFFERED OUTPUT AND W/DECODED OUTPUT AND EXPANDABLE AND WIRE-OR OUTPUTS |
| INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| INCLOSURE MATERIAL | CERAMIC AND GLASS |
| INPUT CIRCUIT PATTERN | 6 INPUT |
| OPERATING TEMP RANGE | -55.0 TO 125.0 CELSIUS |
| OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| MAXIMUM POWER DISSIPATION RATING | 625.0 MILLIWATTS |
| MEMORY CAPACITY | UNKNOWN |
| MEMORY DEVICE TYPE | ROM |
| TIME RATING PER CHACTERISTIC | 50.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | -1.5 VOLTS MINIMUM POWER SOURCE AND 5.5 VOLTS MAXIMUM POWER SOURCE |
| STORAGE TEMP RANGE | -65.0 TO 150.0 CELSIUS |
| TERMINAL TYPE AND QUANTITY | 16 PRINTED CIRCUIT |
| TERMINAL SURFACE TREATMENT | SOLDER |
| TEST DATA DOCUMENT | 49956-461442 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |