|
|
|
National Stock Number:
5961-01-380-6989
Federal Supply Class:
5961
National Item Identification Number:
013806989
Description:
SEMICONDUCTOR DEVICE,THYRISTOR
Detail:
A bistable semiconductor device comprising three or more junctions which is normally a nonconductor until the application of a signal to a gate terminal, at which time the device switches to the conductive state. Includes devices capable of being switched back to the nonconductive state upon application of a different signal to the same or another gate terminal. May or may not include mounting hardware and/or heatsink. For solid state devices which are responsive to visible or infrared radiant energy, see SEMICONDUCTOR DEVICE, PHOTO.
|
Manufacturer Information:
| 27516-0001 | 0C7V7 | TELEDYNE DEFENSE ELECTRONICS, LLC | | 27516-0001 | 19397 | BAE SYSTEMS INFORMATION & ELECTRONIC SYSTEMS INTEGRATION INC. | | 27516-0001 | 27194 | TECCOR ELECTRONICS INC SEMICONDUCTOR DIV SUB OF RANCO | | S560 | 27194 | TECCOR ELECTRONICS INC SEMICONDUCTOR DIV SUB OF RANCO | | 27516-0001 | 4Y548 | RIVERSIDE ASSOCIATES INC DBA HIGH REL GROUP |
|
Techincal Specification:
| CURRENT RATING PER CHARACTERISTIC | 0.10 AMPERES MAXIMUM AVERAGE ON-STATE CURRENT, 180 DEGREES CONDUCTION ANGLE, AVERAGE OVER A FULL 60-HZ CYCLE | | INTERNAL CONFIGURATION | JUNCTION CONTACT | | OVERALL HEIGHT | 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM | | OVERALL LENGTH | 0.175 INCHES MINIMUM AND 0.205 INCHES MAXIMUM | | OVERALL WIDTH | 0.125 INCHES MINIMUM AND 0.165 INCHES MAXIMUM | | MATERIAL | PLASTIC ENCLOSURE | | MAXIMUM OPERATING TEMP PER MEASUREMENT POINT | 150.0 CELSIUS AMBIENT AIR | | MOUNTING METHOD | TERMINAL | | SEMICONDUCTOR MATERIAL | SILICON | | VOLTAGE RATING IN VOLTS PER CHARACTERISTIC | 100.0 MAXIMUM NONREPETITIVE PEAK REVERSE VOLTAGE, MAXIMUM PEAK TOTAL VALUE | | TERMINAL LENGTH | 0.500 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 3 PIN | | TEST DATA DOCUMENT | 19397-27516 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|