| MOUNTING METHOD | THREADED STUD |
| TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG AND |
| 1 THREADED STUD |
| OVERALL LENGTH | 1.172 INCHES MINIMUM AND |
| 1.453 INCHES MAXIMUM |
| VOLTAGE RATING IN VOLTS PER CHARACTERISTIC | 50.0 NOMINAL REVERSE VOLTAGE, INSTANTANEOUS |
| MATERIAL | SILICON SEMICONDUCTOR |
| CURRENT RATING PER CHARACTERISTIC | 70.00 AMPERES NOMINAL AVERAGE FORWARD CURRENT AVERAGED OVER A FULL 50-HZ CYCLE |
| JOINT ELECTRONIC DEVICE ENGINEERING COUNCIL/JEDEC/CASE OUTLINE DESIGNATION | DO-203AB |
| MOUNTING FACILITY QUANTITY | 1 |
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| THREAD QUANTITY PER INCH | 28 |
| TERMINAL LENGTH | 0.550 INCHES MAXIMUM |
| OVERALL DIAMETER | 0.667 INCHES MAXIMUM |
| OVERALL WIDTH ACROSS FLATS | 0.669 INCHES MINIMUM AND |
| 0.688 INCHES MAXIMUM |
| FEATURES PROVIDED | GOLD PLATED LEADS |
| TEST DATA DOCUMENT | 81349-MIL-S-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND LOCATION | TERMINALS GOLD |
| SPECIAL FEATURES | R INDICATES REVERSE POLARITY; JUNCTION PATTERN ARRANGEMENT: PN |
| SPECIFICATION/STANDARD DATA | 81349-MIL-S-19500/550 GOVERNMENT SPECIFICATION |
| SPEC/STD CONTROLLING DATA | |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | JAN1N6304R |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-PRF-19500/550 |