|
|
|
National Stock Number:
5961-01-150-1268
Federal Supply Class:
5961
National Item Identification Number:
011501268
Description:
SEMICONDUCTOR DEVICE,DIODE
Detail:
A TWO ELECTRODE SEMICONDUCTOR DEVICE HAVING AN ASYMMETRICAL VOLTAGE - CURRENT CHARACTERISTIC. MAY OR MAY NOT INCLUDE MOUNTING HARDWARE AND/OR HEATSINK. EXCLUDES LIGHT EMITTING DIODE AND SEMICONDUCTOR DEVICE,PHOTO. FOR ITEMS CONTAINING MATERIAL SUCH AS SELENIUM AND COPPER OXIDE, SEE RECIFIER, METALLIC.
|
Manufacturer Information:
| 10-22475-2 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | 10-22475-2 | 81205 | THE BOEING COMPANY | | JANTXV1N5616 | 12969 | MICRO USPD INC | | JANTXV1N5616 | 13409 | RSM ELECTRON POWER INC | | JANTXV1N5616 | 14099 | SEMTECH CORPORATION | | JANTXV1N5616 | 14552 | MICROSEMI CORPORATION | | JANTXV1N5616 | 14936 | GENERAL SEMICONDUCTOR INC | | NH10-22475-2 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | JANTXV1N5616 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MOUNTING METHOD | TERMINAL | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | OVERALL LENGTH | 0.165 INCHES MAXIMUM | | VOLTAGE RATING IN VOLTS PER CHARACTERISTIC | 400.0 MAXIMUM REVERSE VOLTAGE, INSTANTANEOUS | | MATERIAL | GLASS INCLOSURE | | SILICON SEMICONDUCTOR | | CURRENT RATING PER CHARACTERISTIC | 1.00 AMPERES MAXIMUM AVERAGE FORWARD CURRENT AVERAGED OVER A FULL 60-HZ CYCLE | | MAXIMUM OPERATING TEMP PER MEASUREMENT POINT | 200.0 DEG CELSIUS AMBIENT AIR | | TERMINAL LENGTH | 1.000 INCHES MINIMUM | | OVERALL DIAMETER | 0.110 INCHES MAXIMUM | | NUCLEAR HARDNESS CRITICAL FEATURE | HARDENED | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | TEST DATA DOCUMENT | 81205-10-22475 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | SPECIAL FEATURES | HARDNESS CRITICAL ITEM |
|
|