|
|
|
National Stock Number:
5955-01-393-7181
Federal Supply Class:
5955
National Item Identification Number:
013937181
Description:
CRYSTAL UNIT,QUARTZ
Detail:
An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.
|
Manufacturer Information:
| CR101/U15M00000 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-3098/103 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-PRF-3098/103 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DRIVE LEVEL RATING | 4.0 MILLIWATTS MINIMUM AND 6.0 MILLIWATTS MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM | | CIRCUIT RESONANCE | ANTIRESONANCE | | DIAMETER | 0.326 INCHES MAXIMUM | | EQUIVALENT RESISTANCE VALUE IN OHMS | 25.0 NOMINAL | | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.005 TO 0.005 | | LOAD CAPACITANCE IN PICOFARADS | 29.5 MINIMUM AND 30.5 MAXIMUM | | OVERALL DIAMETER | 0.420 INCHES MAXIMUM | | OVERALL LENGTH | 0.265 INCHES MAXIMUM | | MODE OF OSCILLATION | FUNDAMENTAL | | OPERATING TEMP RANGE | -55.0 TO 105.0 CELSIUS | | SHUNT CAPACITANCE IN PICOFARADS | 7.0 MAXIMUM | | SPECIFICATION/STANDARD DATA | 81349-MIL-PRF-3098/103 GOVERNMENT SPECIFICATION | | SPECIFIED FREQUENCY | 15.000 MEGAHERTZ | | STYLE DESIGNATOR | HAT TYPE, 3 WIRE LEADS | | TERMINAL DIAMETER | 0.0175 INCHES MINIMUM AND 0.0205 INCHES MAXIMUM | | TERMINAL LENGTH | 0.600 INCHES MINIMUM | | TEST DATA DOCUMENT | 81349-MIL-PRF-3098 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|