|
|
|
National Stock Number:
5955-01-094-9068
Federal Supply Class:
5955
National Item Identification Number:
010949068
Description:
OSCILLATOR,NONCRYSTAL CONTROLLED
Detail:
AN OSCILLATOR WHOSE OPERATING FREQUENCY(IES) IS CONTROLLED BY AN ELECTRONIC DEVICE OTHER THAN A CRYSTAL UNIT, QUARTZ. FOR AN OSCILLATOR CONTROLLED BY A CRYSTAL, SEE OSCILLATOR (1), CRYSTAL CONTROLLED. SEE ALSO GENERATOR, SIGNAL; AND CALIBRATOR, FREQUENCY. EXCLUDES FREQUENCY SUPPLY, TELEPHONE CARRIER; RESONATOR, TUNING FORK; AND OSCILLATOR, PULSE DELAY.
|
Manufacturer Information:
| 5413-20M | 08111 | MF ELECTRONICS CORP. | | 85765500-01 | 27963 | GENERAL DYNAMICS INFORMATION SYSTEMS INC. DBA GENERAL DYNAMICS ADVANCED INFORMATION SYSTEMS | | HY4521-20M | 08111 | MF ELECTRONICS CORP. | | 85765500-01 | 3CYA2 | GENERAL DYNAMICS MISSION SYSTEMS, INC. | | 85765500-01 | 57474 | HYTEK MICROSYSTEMS INC |
|
Techincal Specification:
| AVERAGE LIFE MEASUREMENT | NOT RATED | | BASIC SHAPE STYLE | RECTANGULAR OR SQUARE | | CIRCUIT CONSTRUCTION TYPE | SOLID STATE | | CONNECTION CONTACT TYPE AND QUANTITY | 14 PRINTED CIRCUIT EXTERNAL | | CONNECTION TYPE | PRINTED CIRCUIT BOTTOM | | CONTROL TYPE | LOCAL | | ENVIRONMENTAL PROTECTION | SHOCK RESISTANT AND VIBRATION | | EXTERNAL DC OPERATING VOLTAGE IN VOLTS | 5.0 NOMINAL SINGLE VOLTAGE | | FREQUENCY PER CHANNEL | 20.0 MEGAHERTZ NOMINAL OUTPUT CHANNEL | | IDENTIFICATION DESIGNATOR | 5413-20M-08111 | | INCLOSURE TYPE | HERMETICALLY SEALED | | INSTALLATION DESIGN | MODULE | | OVERALL LENGTH | 0.790 INCHES MAXIMUM | | OVERALL WIDTH | 0.490 INCHES MAXIMUM | | OPERATING CONTROL METHOD | MANUAL | | OPERATING TEMP RANGE | -30.0 TO 85.0 CELSIUS | | OVERALL GAIN | 50.0 MILLIAMPERES | | OVERALL HEIGHT | 0.160 INCHES MINIMUM AND 0.190 INCHES MAXIMUM | | SIGNAL VOLTAGE RATING PER CHANNEL | 0.400 VOLTS MINIMUM OUTPUT AND 2.400 VOLTS MAXIMUM OUTPUT | | SPECIAL FEATURES | MONOLITHIC AND POSITIVE OUTPUTS | | STORAGE TEMP RANGE | -65.0 TO 150.0 CELSIUS | | TEST DATA DOCUMENT | 27963-85765500 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|