|
|
|
National Stock Number:
5955-00-914-0073
Federal Supply Class:
5955
National Item Identification Number:
009140073
Description:
CRYSTAL UNIT,QUARTZ
Detail:
An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.
|
Manufacturer Information:
| 290-0206-000 | 13499 | ROCKWELL COLLINS, INC. | | CR-47A/U455.000KHZ | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | CR47/U455K0000 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-PRF-3098/26 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC3098-26 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY LENGTH | 0.775 INCHES MAXIMUM | | BODY THICKNESS | 0.317 INCHES MAXIMUM | | BODY WIDTH | 0.725 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.486 INCHES NOMINAL | | CIRCUIT RESONANCE | ANTIRESONANCE | | CONTROLLED REFERENCE TEMP | 75.0 CELSIUS | | DRIVE LEVEL RATING | 2.0 MILLIWATTS NOMINAL AND 1.6 MILLIWATTS MINIMUM AND 2.4 MILLIWATTS MAXIMUM | | EQUIVALENT RESISTANCE VALUE IN OHMS | 8000.0 NOMINAL | | FREQUENCY STABILITY IN PERCENT | -0.0005 TO 0.0005 | | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.002 TO 0.002 | | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 | | LOAD CAPACITANCE IN PICOFARADS | 20.0 NOMINAL AND 19.5 MINIMUM AND 20.5 MAXIMUM | | MODE OF OSCILLATION | FUNDAMENTAL | | OPERABLE TEMP RANGE | -40.0 TO 70.0 CELSIUS | | OPERATING TEMP RANGE | +70.0 TO 80.0 CELSIUS | | OVERALL LENGTH | 1.023 INCHES MAXIMUM | | OVERALL THICKNESS | 0.352 INCHES MAXIMUM | | OVERALL WIDTH | 0.757 INCHES MAXIMUM | | SPECIFIED FREQUENCY | 455.000 KILOHERTZ | | STYLE DESIGNATOR | OVAL BODY, PIN TERMINALS | | TERMINAL DIAMETER | 0.050 INCHES NOMINAL | | TERMINAL LENGTH | 0.238 INCHES NOMINAL | | TEST DATA DOCUMENT | 81349-MILC3098 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|