|
|
|
National Stock Number:
5955-00-763-5963
Federal Supply Class:
5955
National Item Identification Number:
007635963
Description:
CRYSTAL UNIT,QUARTZ
Detail:
An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.
|
Manufacturer Information:
| 289-5603-00 | 13499 | ROCKWELL COLLINS, INC. | | 289-5603-00M | 00136 | MICROSEMI CORP. - HIGH PERFORMANCE TIMING | | ER289-5603-00 | 13571 | ELECTRONIC RESEARCH CO SUB OF Q-TECH CORP | | MIL-C-3098/90 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-PRF-3098/90 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | CR114/U3M100000 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RH289-5603-00 | 82567 | CTS REEVES FREQUENCY PRODUCTS |
|
Techincal Specification:
| MODE OF OSCILLATION | FUNDAMENTAL | | EQUIVALENT RESISTANCE VALUE IN OHMS | 300.0 MAXIMUM | | CIRCUIT RESONANCE | ANTIRESONANCE | | SPECIFIED FREQUENCY | 3.100 MEGAHERTZ | | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.005 TO 0.005 AND | | -0.0010 TO 0.0010 | | OPERATING TEMP RANGE | -55.0 TO 105.0 DEG CELSIUS AND | | -55.0 TO 125.0 DEG CELSIUS | | DRIVE LEVEL RATING | 0.8 MILLIWATTS MINIMUM AND | | 1.2 MILLIWATTS MAXIMUM | | MATERIAL | GLASS COVER, HOLDER | | STYLE DESIGNATOR | TUBE BODY, WIRE LEADS | | LOAD CAPACITANCE IN PICOFARADS | 31.5 MINIMUM AND | | 32.5 MAXIMUM | | OVERALL LENGTH | 0.650 INCHES MINIMUM AND | | 0.660 INCHES MAXIMUM | | TERMINAL LENGTH | 0.120 INCHES MINIMUM AND | | 0.130 INCHES MAXIMUM | | OVERALL WIDTH | 0.435 INCHES MAXIMUM | | BODY LENGTH | 0.530 INCHES MAXIMUM | | BODY WIDTH | 0.402 INCHES MAXIMUM | | BODY THICKNESS | 0.150 INCHES MAXIMUM | | OVERALL THICKNESS | 0.183 INCHES MAXIMUM | | TERMINAL DIAMETER | 0.038 INCHES MINIMUM AND | | 0.042 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.184 INCHES MINIMUM AND | | 0.200 INCHES MAXIMUM | | TEST DATA DOCUMENT | 81349-MIL-C-3098/38 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-3098/90 GOVERNMENT SPECIFICATION | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | CR114/U3M100000 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-PRF-3098/90 |
|
|