5950-01-373-8263, COIL,RADIO FREQUENCY

National Stock Number:
5950-01-373-8263

Federal Supply Class:
5950

National Item Identification Number:
013738263

Description:
COIL,RADIO FREQUENCY

Detail:
An item consisting of a partial turn as one or more turns of wire or other conductive material which constitutes one continuous untapped winding. It may be wound or formed in other than a circular manner and may be self-supporting, requiring no coil form. It is specifically designed to furnish inductive reactance in a circuit carrying radio frequency current ranging from 20 kilohertz (kilocycles) and above. It may include tuning devices, integral resistors and capacitors; however, excludes FILTER (as modified). The coil has only two electrical terminals. For items having tapped winding or more than one winding - see TRANSFORMER, RADIO FREQUENCY. For coils wound on resistors, which are designed to be inserted in the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see SUPPRESSOR, PARASITIC.

Manufacturer Information:

6810

04213

CADDELL BURNS MANUFACTURING CO INC

Techincal Specification:

ADJUSTMENT DEVICE DRIVE TYPE	SLOTTED SCREW SINGLE COMPONENT
ADJUSTMENT METHOD AND QUANTITY	1 ADJUSTABLE CORE SINGLE COMPONENT
BODY HEIGHT	0.420 INCHES MAXIMUM
BODY LENGTH	0.315 INCHES NOMINAL
BODY WIDTH	0.315 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	0.200 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH	0.200 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
COIL FORM TYPE	HOLLOW SINGLE COMPONENT
CORE CONSTRUCTION	S0LID SINGLE COMPONENT
INCLOSURE TYPE	PARTIALLY INCLOSED
INDUCTANCE RATING	0.17 MICROHENRIES MINIMUM AND 0.23 MICROHENRIES MAXIMUM SINGLE COMPONENT SINGLE WINDING
MOUNTING METHOD	TERMINAL SINGLE GROUP
QUALITY FACTOR	85 MINIMUM SINGLE COMPONENT SINGLE WINDING
RATING METHOD	ELECTRICAL SINGLE COMPONENT SINGLE WINDING
RELIABILITY INDICATOR	NOT ESTABLISHED
TERMINAL TYPE AND QUANTITY	2 PIN
TEST DATA DOCUMENT	04213-6806-6815 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

Click here to Register for Free 30-day Trial