|
|
|
National Stock Number:
5950-01-366-5473
Federal Supply Class:
5950
National Item Identification Number:
013665473
Description:
COIL,RADIO FREQUENCY
Detail:
An item consisting of a partial turn as one or more turns of wire or other conductive material which constitutes one continuous untapped winding. It may be wound or formed in other than a circular manner and may be self-supporting, requiring no coil form. It is specifically designed to furnish inductive reactance in a circuit carrying radio frequency current ranging from 20 kilohertz (kilocycles) and above. It may include tuning devices, integral resistors and capacitors; however, excludes FILTER (as modified). The coil has only two electrical terminals. For items having tapped winding or more than one winding - see TRANSFORMER, RADIO FREQUENCY. For coils wound on resistors, which are designed to be inserted in the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see SUPPRESSOR, PARASITIC.
|
Manufacturer Information:
| 19802 | 03550 | VANGUARD ELECTRONICS, LLC | | 3164999-012 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| ADJUSTMENT DEVICE DRIVE TYPE | SLOTTED SCREW ALL COMPONENTS | | ADJUSTMENT METHOD AND QUANTITY | 1 ADJUSTABLE CORE ALL COMPONENTS | | BODY LENGTH | 0.4425 INCHES NOMINAL | | BODY OUTSIDE DIAMETER | 0.250 INCHES NOMINAL | | COIL FORM TYPE | HOLLOW ALL COMPONENTS | | DC RESISTANCE RATING IN OHMS | 2.000 SINGLE COMPONENT SINGLE WINDING | | INCLOSURE TYPE | OPEN | | INDUCTANCE RATING | 5.40 MICROHENRIES MINIMUM AND 8.20 MICROHENRIES MAXIMUM SINGLE COMPONENT SINGLE WINDING | | QUALITY FACTOR | 45 MINIMUM SINGLE COMPONENT SINGLE WINDING | | RATING METHOD | ELECTRICAL SINGLE COMPONENT SINGLE WINDING | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD | | TEST DATA DOCUMENT | 10001-3164999 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|