5950-01-314-5002, COIL,RADIO FREQUENCY

National Stock Number:
5950-01-314-5002

Federal Supply Class:
5950

National Item Identification Number:
013145002

Description:
COIL,RADIO FREQUENCY

Detail:
An item consisting of a partial turn as one or more turns of wire or other conductive material which constitutes one continuous untapped winding. It may be wound or formed in other than a circular manner and may be self-supporting, requiring no coil form. It is specifically designed to furnish inductive reactance in a circuit carrying radio frequency current ranging from 20 kilohertz (kilocycles) and above. It may include tuning devices, integral resistors and capacitors; however, excludes FILTER (as modified). The coil has only two electrical terminals. For items having tapped winding or more than one winding - see TRANSFORMER, RADIO FREQUENCY. For coils wound on resistors, which are designed to be inserted in the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see SUPPRESSOR, PARASITIC.

Manufacturer Information:

064-18200-03	95266	OECO, LLC
315-18200-03	95266	OECO, LLC

Techincal Specification:

BODY LENGTH	0.540 INCHES MINIMUM AND 0.560 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
COIL FORM TYPE	SOLID SINGLE COMPONENT
CORE CONSTRUCTION	S0LID SINGLE COMPONENT
DC RESISTANCE RATING IN OHMS	0.800 SINGLE COMPONENT SINGLE WINDING
INCLOSURE TYPE	FULLY INCLOSED
INDUCTANCE RATING	1.26 MILLIHENRIES MINIMUM SINGLE COMPONENT SINGLE WINDING
MAXIMUM OPERATING TEMP	130.0 CELSIUS
MOUNTING FACILITY QUANTITY	1 SINGLE GROUP
MOUNTING METHOD	THREADED HOLE(S) SINGLE GROUP
NOMINAL THREAD SIZE	0.112 INCHES SINGLE GROUP
RATING METHOD	ELECTRICAL SINGLE COMPONENT SINGLE WINDING
RELIABILITY INDICATOR	NOT ESTABLISHED
SPECIAL FEATURES	WINDING INTERNALLY SHIELDED
WINDING OPERATING CURRENT	840.0 MILLIAMPERES DC NOMINAL SINGLE COMPONENT SINGLE WINDING
TERMINAL TYPE AND QUANTITY	2 PIN
TEST DATA DOCUMENT	95266-315-18200-03 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC) SINGLE GROUP

Click here to Register for Free 30-day Trial