5950-01-302-3330, TRANSFORMER,POWER

National Stock Number:
5950-01-302-3330

Federal Supply Class:
5950

National Item Identification Number:
013023330

Description:
TRANSFORMER,POWER

Detail:
A TRANSFORMER CONSISTING OF ONE OR MORE PRIMARY WINDING(S) AND ONE OR MORE SECONDARY WINDING(S). IT MAY BE DESIGNED FOR DIRECT CONNECTION TO AN ALTERNATING CURRENT SOURCE FOR PURPOSES OF CHANGING THE SECONDARY VOLTS AND AMPERES OR DESIGNED TO ELIMINATE METALLIC INTERCONNECTION BETWEEN CIRCUITS IN AN OVERALL ONE TO ONE VOLTAGE RATIO, WITH OR WITHOUT ADDITIONAL OUTPUT WINDINGS, OR ITEMS DESIGNED TO AUTOMATICALLY MAINTAIN A CONSTANT OUTPUT VOLTAGE WITHIN SPECIFIED LIMITS UNDER VARYING INPUT OR LOAD CONDITIONS. ALSO INCLUDES ITEMS HAVING A PROVISION FOR MECHANICALLY CHANGING THE TURNS RATIO OR INDUCTIVE COUPLING IN PROGRESSIVE INCREMENTS BY MEANS OF VOLTAGE TAPS, RATIO ADJUSTER, OR DEVICES OE SIMILAR DESIGN. FOR TRANSFORMERS HAVING WINDING(S) COMMON TO BOTH INPUT AND OUTPUT CIRCUITS, SEE TRANSFORMER (1), POWER, AUTOTRANSFORMER. EXCLUDES TRANSFORMER (1), PULSE.

Manufacturer Information:

593R819A01

97942

NORTHROP GRUMMAN SYSTEMS CORPORATION

Techincal Specification:

BODY HEIGHT	3.980 INCHES MAXIMUM
BODY LENGTH	5.570 INCHES MAXIMUM
BODY WIDTH	2.320 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	3.940 INCHES NOMINAL FIRST MOUNTING FACILITY SINGLE CENTER GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH	1.790 INCHES NOMINAL FIRST MOUNTING FACILITY SINGLE CENTER GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO THE ALTITUDE OF AN ISOSCELES TRIANGLE	0.350 INCHES NOMINAL SECOND MOUNTING FACILITY SINGLE CENTER GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO THE BASE OF AN ISOSCELES TRIANGLE	1.570 INCHES NOMINAL SECOND MOUNTING FACILITY SINGLE CENTER GROUP
FREQUENCY RATING	400.0 HERTZ NOMINAL SINGLE COMPONENT
INCLOSURE TYPE	FULLY INCLOSED
INPUT-OUTPUT PHASE RELATIONSHIP	THREE PHASE TO THREE PHASE SINGLE COMPONENT
MAXIMUM OPERATING TEMP	70.0 CELSIUS
MOUNTING FACILITY QUANTITY	3 SECOND GROUP
MOUNTING FACILITY QUANTITY	4 FIRST GROUP
MOUNTING HOLE DIAMETER	0.147 INCHES NOMINAL SECOND GROUP
MOUNTING HOLE DIAMETER	0.191 INCHES NOMINAL FIRST GROUP
MOUNTING METHOD	UNTHREADED HOLE(S) ALL GROUPINGS
RELIABILITY INDICATOR	NOT ESTABLISHED
WINDING FUNCTION AND QUANTITY	1 PRIMARY AND 3 SECONDARY SINGLE COMPONENT
WINDING OPERATING CURRENT	245.0 MILLIAMPERES AC NOMINAL SINGLE COMPONENT FIRST SECONDARY
WINDING OPERATING CURRENT	270.0 MILLIAMPERES AC NOMINAL SINGLE COMPONENT THIRD SECONDARY
WINDING OPERATING CURRENT	91.0 MILLIAMPERES AC NOMINAL SINGLE COMPONENT SECOND SECONDARY
WINDING OPERATING VOLTAGE	123.00 AC VOLTS NOMINAL SINGLE COMPONENT THIRD SECONDARY
WINDING OPERATING VOLTAGE	1.19 AC KILOVOLTS NOMINAL SINGLE COMPONENT SECOND SECONDARY
WINDING OPERATING VOLTAGE	200.00 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY
WINDING OPERATING VOLTAGE	2.33 AC KILOVOLTS NOMINAL SINGLE COMPONENT FIRST SECONDARY
WINDING SHIELDING METHOD	INTERNAL SHIELD GROUNDED TO INCLOSURE SINGLE COMPONENT
TERMINAL TYPE AND QUANTITY	24 TURRET
TEST DATA DOCUMENT	97942-593R819 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
TRANSFORMER WINDING CONNECTION TYPE	DELTA-DELTA AND DELTA-WYE

Click here to Register for Free 30-day Trial