5950-01-228-3450, COIL,ELECTRICAL

6110-01-228-3449 ELECTRONIC COMPONENTS ASSEMBLY

National Stock Number:
5950-01-228-3450

Federal Supply Class:
5950

National Item Identification Number:
012283450

Description:
COIL,ELECTRICAL

Detail:
An item generally consisting of one or more turns of wire or similar conductive material (in special cases it may be considered as a partial turn). It is specifically designed to concentrate magnetic flux generated by the flow of an electric current, to induce in itself an electromotive force, and to add or subtract inductive reactance in a circuit. It may include tuning devices, integral resistors and capacitors; however, excludes FILTER (as modified). For coils wound on resistors which are designed to be inserted into the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see SUPPRESSOR, PARASITIC..

Manufacturer Information:

407-49654-1

81205

THE BOEING COMPANY

Techincal Specification:

CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	2.000 INCHES NOMINAL FIRST MOUNTING FACILITY SINGLE CENTER GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	2.000 INCHES NOMINAL THIRD MOUNTING FACILITY SINGLE CENTER GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	2.540 INCHES NOMINAL SECOND MOUNTING FACILITY SINGLE CENTER GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH	2.000 INCHES NOMINAL FIRST MOUNTING FACILITY SINGLE CENTER GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH	2.000 INCHES NOMINAL THIRD MOUNTING FACILITY SINGLE CENTER GROUP
DC RESISTANCE RATING IN OHMS	0.300 SINGLE COMPONENT SINGLE WINDING
FREQUENCY RATING	50.0 KILOHERTZ NOMINAL SINGLE COMPONENT
INCLOSURE TYPE	FULLY INCLOSED
INDUCTANCE RATING	2.20 MICROHENRIES NOMINAL SINGLE COMPONENT SINGLE WINDING
OVERALL HEIGHT	3.059 INCHES NOMINAL
OVERALL LENGTH	3.400 INCHES NOMINAL
OVERALL WIDTH	2.810 INCHES NOMINAL
MOUNTING FACILITY QUANTITY	4 ALL GROUPINGS
MOUNTING HOLE DIAMETER	0.140 INCHES NOMINAL SECOND GROUP
MOUNTING HOLE DIAMETER	0.266 INCHES NOMINAL FIRST GROUP
MOUNTING METHOD	THREADED HOLE(S) THIRD GROUP
MOUNTING METHOD	UNTHREADED HOLE(S) FIRST GROUP
MOUNTING METHOD	UNTHREADED HOLE(S) SECOND GROUP
NOMINAL THREAD SIZE	0.164 INCHES THIRD GROUP
RATING METHOD	ELECTRICAL SINGLE COMPONENT SINGLE WINDING
RELIABILITY INDICATOR	NOT ESTABLISHED
WINDING OPERATING CURRENT	5.5 AMPERES DC MAXIMUM SINGLE COMPONENT SINGLE WINDING
WINDING OPERATING VOLTAGE	30.00 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE WINDING
WINDING QUANTITY	1 SINGLE COMPONENT
TERMINAL TYPE AND QUANTITY	2 TAB, SOLDER LUG
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC) THIRD GROUP

Click here to Register for Free 30-day Trial