5950-01-222-3350, TRANSFORMER,POWER

National Stock Number:
5950-01-222-3350

Federal Supply Class:
5950

National Item Identification Number:
012223350

Description:
TRANSFORMER,POWER

Detail:
A TRANSFORMER CONSISTING OF ONE OR MORE PRIMARY WINDING(S) AND ONE OR MORE SECONDARY WINDING(S). IT MAY BE DESIGNED FOR DIRECT CONNECTION TO AN ALTERNATING CURRENT SOURCE FOR PURPOSES OF CHANGING THE SECONDARY VOLTS AND AMPERES OR DESIGNED TO ELIMINATE METALLIC INTERCONNECTION BETWEEN CIRCUITS IN AN OVERALL ONE TO ONE VOLTAGE RATIO, WITH OR WITHOUT ADDITIONAL OUTPUT WINDINGS, OR ITEMS DESIGNED TO AUTOMATICALLY MAINTAIN A CONSTANT OUTPUT VOLTAGE WITHIN SPECIFIED LIMITS UNDER VARYING INPUT OR LOAD CONDITIONS. ALSO INCLUDES ITEMS HAVING A PROVISION FOR MECHANICALLY CHANGING THE TURNS RATIO OR INDUCTIVE COUPLING IN PROGRESSIVE INCREMENTS BY MEANS OF VOLTAGE TAPS, RATIO ADJUSTER, OR DEVICES OE SIMILAR DESIGN. FOR TRANSFORMERS HAVING WINDING(S) COMMON TO BOTH INPUT AND OUTPUT CIRCUITS, SEE TRANSFORMER (1), POWER, AUTOTRANSFORMER. EXCLUDES TRANSFORMER (1), PULSE.

Manufacturer Information:

366010-1	96214	RAYTHEON COMPANY
41910	22558	COAST/ADVANCED CHIP MAGNETICS, INC.

Techincal Specification:

BODY LENGTH	0.520 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	0.570 INCHES MAXIMUM
FREQUENCY RATING	50.0 KILOHERTZ NOMINAL SINGLE COMPONENT
INCLOSURE TYPE	FULLY INCLOSED
INPUT-OUTPUT PHASE RELATIONSHIP	SINGLE PHASE TO SINGLE PHASE SINGLE COMPONENT
MAXIMUM OPERATING TEMP	130.0 CELSIUS
MOUNTING BOLT CIRCLE DIAMETER	0.265 INCHES MINIMUM AND 0.285 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
MOUNTING METHOD	TERMINAL SINGLE GROUP
RELIABILITY INDICATOR	NOT ESTABLISHED
WINDING FUNCTION AND QUANTITY	2 PRIMARY AND 1 SECONDARY SINGLE COMPONENT
WINDING OPERATING CURRENT	13.4 MILLIAMPERES AC NOMINAL SINGLE COMPONENT SINGLE SECONDARY
WINDING OPERATING CURRENT	1.3 AMPERES AC NOMINAL SINGLE COMPONENT SINGLE PRIMARY
WINDING OPERATING VOLTAGE	7.78 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE SECONDARY
TERMINAL TYPE AND QUANTITY	7 PIN
TEST DATA DOCUMENT	96214-366010 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

Click here to Register for Free 30-day Trial