| TERMINAL TYPE AND QUANTITY | 2 TURRET |
| RATING METHOD | ELECTRICAL AND |
| WINDING TURNS SINGLE COMPONENT SINGLE WINDING |
| WINDING QUANTITY | 1 SINGLE COMPONENT |
| INCLOSURE TYPE | OPEN |
| TURN QUANTITY | 35-1/2 SINGLE COMPONENT SINGLE WINDING |
| WINDING CONDUCTOR SIZE | 0.02010 INCHES AMERICAN WIRE GAGE SINGLE COMPONENT SINGLE WINDING |
| WINDING OPERATING CURRENT | 2.0 AMPERES DC MAXIMUM SINGLE COMPONENT SINGLE WINDING |
| DC RESISTANCE RATING IN OHMS | 0.170 SINGLE COMPONENT SINGLE WINDING |
| INDUCTANCE RATING | 202.00 MICROHENRIES NOMINAL SINGLE COMPONENT SINGLE WINDING |
| FREQUENCY RATING | 1.0 KILOHERTZ NOMINAL SINGLE COMPONENT |
| INDUCTANCE TYPE | FIXED |
| MOUNTING METHOD | UNTHREADED HOLE SINGLE GROUP |
| MOUNTING FACILITY QUANTITY | 1 SINGLE GROUP |
| MOUNTING HOLE DIAMETER | 0.120 INCHES NOMINAL SINGLE GROUP |
| OVERALL LENGTH | 0.788 INCHES MAXIMUM |
| OVERALL DIAMETER | 0.693 INCHES MINIMUM AND |
| 0.717 INCHES MAXIMUM |
| FEATURES PROVIDED | TINNED WIRE LEADS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 93322-7109257 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| MAXIMUM OPERATING TEMP | 125.0 DEG CELSIUS |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 93322 |
| MFR SOURCE CONTROLLING REFERENCE | 7109257-107 |