5950-01-017-7166, COIL,RADIO FREQUENCY

National Stock Number:
5950-01-017-7166

Federal Supply Class:
5950

National Item Identification Number:
010177166

Description:
COIL,RADIO FREQUENCY

Detail:
An item consisting of a partial turn as one or more turns of wire or other conductive material which constitutes one continuous untapped winding. It may be wound or formed in other than a circular manner and may be self-supporting, requiring no coil form. It is specifically designed to furnish inductive reactance in a circuit carrying radio frequency current ranging from 20 kilohertz (kilocycles) and above. It may include tuning devices, integral resistors and capacitors; however, excludes FILTER (as modified). The coil has only two electrical terminals. For items having tapped winding or more than one winding - see TRANSFORMER, RADIO FREQUENCY. For coils wound on resistors, which are designed to be inserted in the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see SUPPRESSOR, PARASITIC.

Manufacturer Information:

278-0351-170	13499	ROCKWELL COLLINS, INC.
9405-32	99800	AMERICAN PRECISION INDUSTRIES INC.

Techincal Specification:

ADJUSTMENT DEVICE DRIVE TYPE	SHAFT SINGLE COMPONENT
ADJUSTMENT METHOD AND QUANTITY	1 ADJUSTABLE CORE SINGLE COMPONENT
COIL FORM TYPE	HOLLOW SINGLE COMPONENT
CORE CONSTRUCTION	POWDERED SINGLE COMPONENT
DC RESISTANCE RATING IN OHMS	3.700 SINGLE COMPONENT SINGLE WINDING
INCLOSURE TYPE	FULLY INCLOSED
INDUCTANCE RATING	47.00 MICROHENRIES NOMINAL SINGLE COMPONENT SINGLE WINDING
OVERALL DIAMETER	0.380 INCHES MAXIMUM
OVERALL LENGTH	0.707 INCHES MAXIMUM
MOUNTING BOLT CIRCLE DIAMETER	0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
MOUNTING METHOD	TERMINAL SINGLE GROUP
QUALITY FACTOR	76 MINIMUM SINGLE COMPONENT SINGLE WINDING
RATING METHOD	ELECTRICAL SINGLE COMPONENT SINGLE WINDING
RELIABILITY INDICATOR	NOT ESTABLISHED
WINDING OPERATING CURRENT	240.0 MILLIAMPERES DC MAXIMUM SINGLE COMPONENT SINGLE WINDING
TERMINAL TYPE AND QUANTITY	2 PIN
TEST DATA DOCUMENT	13499-278-0351 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

Click here to Register for Free 30-day Trial