5950-00-148-6965, COIL,RADIO FREQUENCY

6625-00-148-6966 METER,ELECTRICAL FREQUENCY

National Stock Number:
5950-00-148-6965

Federal Supply Class:
5950

National Item Identification Number:
001486965

Description:
COIL,RADIO FREQUENCY

Detail:
An item consisting of a partial turn as one or more turns of wire or other conductive material which constitutes one continuous untapped winding. It may be wound or formed in other than a circular manner and may be self-supporting, requiring no coil form. It is specifically designed to furnish inductive reactance in a circuit carrying radio frequency current ranging from 20 kilohertz (kilocycles) and above. It may include tuning devices, integral resistors and capacitors; however, excludes FILTER (as modified). The coil has only two electrical terminals. For items having tapped winding or more than one winding - see TRANSFORMER, RADIO FREQUENCY. For coils wound on resistors, which are designed to be inserted in the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see SUPPRESSOR, PARASITIC.

Manufacturer Information:

0154-1-4051-15

15942

USACECOM INTELLIGENCE ELECTRONIC WARFARE SENSORS DIRECTORATE

Techincal Specification:

ADJUSTMENT DEVICE DRIVE TYPE	SHAFT SINGLE COMPONENT
ADJUSTMENT METHOD AND QUANTITY	1 ADJUSTABLE CORE SINGLE COMPONENT
BODY LENGTH	0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM
BODY WIDTH	0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM
DISTANCE BETWEEN MOUNTING FACILITY CENTERS	0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
INCLOSURE TYPE	FULLY INCLOSED
INDUCTANCE RATING	1.46 MICROHENRIES NOMINAL SINGLE COMPONENT SINGLE WINDING
OVERALL HEIGHT	0.672 INCHES MINIMUM AND 0.704 INCHES MAXIMUM
MOUNTING METHOD	TAB SINGLE GROUP
MOUNTING TAB WIDTH	0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
QUALITY FACTOR	70 MINIMUM SINGLE COMPONENT SINGLE WINDING
RATING METHOD	ELECTRICAL SINGLE COMPONENT SINGLE WINDING
RELIABILITY INDICATOR	NOT ESTABLISHED
TERMINAL TYPE AND QUANTITY	2 PIN
TEST DATA DOCUMENT	15942-0154-1-4051 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

Click here to Register for Free 30-day Trial