5950-00-006-4685, TRANSFORMER,POWER

5998-00-006-4687 EXTRACTOR,ELECTRICAL CARD

National Stock Number:
5950-00-006-4685

Federal Supply Class:
5950

National Item Identification Number:
000064685

Description:
TRANSFORMER,POWER

Detail:
A TRANSFORMER CONSISTING OF ONE OR MORE PRIMARY WINDING(S) AND ONE OR MORE SECONDARY WINDING(S). IT MAY BE DESIGNED FOR DIRECT CONNECTION TO AN ALTERNATING CURRENT SOURCE FOR PURPOSES OF CHANGING THE SECONDARY VOLTS AND AMPERES OR DESIGNED TO ELIMINATE METALLIC INTERCONNECTION BETWEEN CIRCUITS IN AN OVERALL ONE TO ONE VOLTAGE RATIO, WITH OR WITHOUT ADDITIONAL OUTPUT WINDINGS, OR ITEMS DESIGNED TO AUTOMATICALLY MAINTAIN A CONSTANT OUTPUT VOLTAGE WITHIN SPECIFIED LIMITS UNDER VARYING INPUT OR LOAD CONDITIONS. ALSO INCLUDES ITEMS HAVING A PROVISION FOR MECHANICALLY CHANGING THE TURNS RATIO OR INDUCTIVE COUPLING IN PROGRESSIVE INCREMENTS BY MEANS OF VOLTAGE TAPS, RATIO ADJUSTER, OR DEVICES OE SIMILAR DESIGN. FOR TRANSFORMERS HAVING WINDING(S) COMMON TO BOTH INPUT AND OUTPUT CIRCUITS, SEE TRANSFORMER (1), POWER, AUTOTRANSFORMER. EXCLUDES TRANSFORMER (1), PULSE.

Manufacturer Information:

4-522	11603	WINTRON CO
40-12290	50508	MAGNETIC COMPONENTS INC
42099	22558	COAST/ADVANCED CHIP MAGNETICS, INC.
8892400014-1	57057	NAVCOM DEFENSE ELECTRONICS, INC.
TP1461	91196	NORTH ERIE ELECTRONICS, INC

Techincal Specification:

CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	4.240 INCHES MINIMUM AND 4.260 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH	2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
FREQUENCY RATING	50.0 HERTZ MINIMUM AND 420.0 HERTZ MAXIMUM SINGLE COMPONENT
INCLOSURE TYPE	FULLY INCLOSED
INPUT-OUTPUT PHASE RELATIONSHIP	SINGLE PHASE TO SINGLE PHASE SINGLE COMPONENT
OVERALL HEIGHT	4.500 INCHES MAXIMUM
OVERALL LENGTH	5.000 INCHES MINIMUM AND 5.060 INCHES MAXIMUM
OVERALL WIDTH	4.000 INCHES MAXIMUM
MAXIMUM OPERATING TEMP	85.0 CELSIUS
MOUNTING FACILITY QUANTITY	4 SINGLE GROUP
MOUNTING HOLE DIAMETER	0.210 INCHES MINIMUM AND 0.220 INCHES MAXIMUM SINGLE GROUP
MOUNTING METHOD	BRACKET(S) AND UNTHREADED HOLE(S) SINGLE GROUP
SPECIAL FEATURES	2PRIMARY WINDINGS; 5SECONDARY WINDINGS
RELIABILITY INDICATOR	NOT ESTABLISHED
WINDING FUNCTION AND QUANTITY	2 PRIMARY AND 5 SECONDARY SINGLE COMPONENT
WINDING OPERATING CURRENT	2.2 AMPERES AC MAXIMUM SINGLE COMPONENT THIRD SECONDARY
WINDING OPERATING CURRENT	2.4 AMPERES AC MINIMUM AND 3.1 AMPERES AC MAXIMUM SINGLE COMPONENT FIRST SECONDARY
WINDING OPERATING CURRENT	1.6 AMPERES AC MAXIMUM SINGLE COMPONENT FOURTH SECONDARY
WINDING OPERATING CURRENT	20.0 AMPERES AC MAXIMUM SINGLE COMPONENT SECOND SECONDARY
WINDING OPERATING VOLTAGE	114.00 AC VOLTS NOMINAL SINGLE COMPONENT ALL PRIMARY
WINDING OPERATING VOLTAGE	14.80 AC VOLTS NOMINAL SINGLE COMPONENT SECOND SECONDARY
WINDING OPERATING VOLTAGE	32.00 AC VOLTS NOMINAL SINGLE COMPONENT THIRD SECONDARY
WINDING OPERATING VOLTAGE	8.40 AC VOLTS NOMINAL AND 13.40 AC VOLTS NOMINAL AND 16.80 AC VOLTS NOMINAL SINGLE COMPONENT FIRST SECONDARY
WINDING OPERATING VOLTAGE	53.00 AC VOLTS NOMINAL SINGLE COMPONENT FOURTH SECONDARY
WINDING SHIELDING METHOD	INTERNAL SHIELD BROUGHT OUT TO TERMINAL SINGLE COMPONENT
TERMINAL TYPE AND QUANTITY	19 SOLDER STUD AND 3 THREADED STUD
TEST DATA DOCUMENT	57057-8892400014 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

Click here to Register for Free 30-day Trial