|
|
|
National Stock Number:
5940-01-112-3110
Federal Supply Class:
5940
National Item Identification Number:
011123110
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 603-JJ-01-SI | 26405 | REGAL BELOIT AMERICA, INC | | 603D-1SE | 83330 | DIALIGHT CORPORATION | | 651416 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 651416 | 10171 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | LO1544 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | 651416 | 1W383 | TOOLEX, INC |
|
Techincal Specification:
| DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.210 INCHES | | DISTANCE BETWEEN TERMINAL ROW CENTERS | 0.620 INCHES | | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.905 INCHES | | BASE THICKNESS | 0.430 INCHES | | BOARD CONSTRUCTION | HOLLOW CONSTRUCTION WITHOUT INSULATED STRIP | | BOARD HEIGHT EXCLUDING TERMINALS | 0.750 INCHES | | BOARD OVERALL HEIGHT | 0.750 INCHES | | BOARD OVERALL LENGTH | 1.406 INCHES | | BOARD OVERALL WIDTH | 1.810 INCHES | | BODY STYLE | BARRIER TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.620 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.687 INCHES | | CURRENT RATING IN AMPS | 50.0 | | DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 1700.0 | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TYPE MAI-60 MIL SPEC SINGLE MATERIAL RESPONSE BOARD | | MATERIAL | COPPER ALLOY TERMINALS | | MATERIAL | PLASTIC POLYESTER AND GLASS FIBER BOARD | | MOUNTING HOLE DIAMETER | 0.203 INCHES | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE(S) | | NONFEEDTHRU TERMINAL QUANTITY | 1 SINGLE | | NONFEEDTHRU TERMINAL TYPE | 857 SINGLE | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY SPECIAL FEATURES | | SPECIAL FEATURES | MTG HOLES ARE AT LEFTEND OF TERMINAL BOARD; SPECIAL REQUIREMENTS FOR IRPOD HX | | SURFACE TREATMENT | NICKEL TERMINALS | | TERMINAL CONNECTING LINK QUANTITY | 1 SINGLE | | TERMINAL CONNECTING LINK TYPE | 1 SINGLE | | TERMINAL DESIGN | LINKED NONFEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | MULTI-ROW | | TERMINAL ROW QUANTITY | 2 |
|
|