| BODY STYLE | STRAIGHT SHAPE, INTERNAL COUPLING |
| CONNECTOR LOCKING METHOD | INTERNALLY THREADED COUPLING RING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | 15-19 SINGLE MATING END |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT QUANTITY | 19 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT POSITION IN DEG | 53.0 AND 156.0 AND 220.0 AND 255.0 |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD SIZE | 22.0 MILLIMETERS AND 1.000 INCHES |
| OVERALL DIAMETER | 32.5 MILLIMETERS MAXIMUM |
| OVERALL LENGTH | 33.16 MILLIMETERS MAXIMUM |
| POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL | GOLD |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT | CADMIUM |
| SHELL TYPE | SOLID |
| SPECIAL FEATURES | SHELL TO SHELL CONDUCTIVITY SHALL BE ONE MILLIOHM MAXIMUM |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-38999 GOVERNMENT SPECIFICATION |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| TEST DATA DOCUMENT | 81349-D38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 76823-05A108 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD CLASS | 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD PITCH IN MILLIMETERS | 1.00 |
| THREAD QUANTITY PER INCH | 10 |
| THREAD SERIES DESIGNATOR | ISO M AND SPECIAL ACME |
| THREAD TOLERANCE CLASS | 6G EXTERNAL |
| THREADED DEVICE TYPE | BACK SHELL AND COUPLING FACILITY |