| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.459 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING |
| BUSHING ACCOMMODATION HOLE SHAPE | ROUND W/FLAT |
| CONNECTOR LOCKING METHOD | BAYONET PIN |
| CONTACT POSITION ARRANGEMENT STYLE | 24-24 SINGLE MATING END |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SECOND CONTACT GROUPING |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SECOND CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SECOND CONTACT GROUPING |
| DEPARTURE FROM CITED DOCUMENT | MODIFIED BY DELETION OF 17 CONTACTS, JUMPER WIRES ON THE REMAINING 7 AND A BACKSHELL CAP. |
| ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF |
| INCLUDED CONTACT QUANTITY | 0 SINGLE MATING END FIRST CONTACT GROUPING |
| INCLUDED CONTACT QUANTITY | 7 SINGLE MATING END SECOND CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND SOCKET SINGLE MATING END SECOND CONTACT GROUPING |
| INSERT POSITION IN DEG | 0.0 |
| OVERALL DIAMETER | 2.405 INCHES MAXIMUM |
| OVERALL LENGTH | 0.881 INCHES MINIMUM AND 0.891 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| MOUNTING FACILITY THICKNESS | 0.062 INCHES MINIMUM AND 0.109 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 1.4375 INCHES |
| NOMINAL THREAD LENGTH | 0.219 INCHES |
| SHELL SURFACE TREATMENT | CADMIUM |
| SHELL TYPE | SOLID |
| POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES. GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.007 GOLD GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SPECIAL FEATURES | ITEM IS A MODIFIED MS27474T24B24S RECEPTACLE WITH JAM NUT AND O'RING REMOVED, ONLY 7 CONTACTS SUPPLIED WHICH ARE JUMPERED A TO U, Z TO V AND W TO H TO N AND ARE INSIDE A BACKSHELL CAP. |
| UNTHREADED MOUNTING HOLE DIAMETER | 1.816 INCHES MINIMUM AND 1.826 INCHES MAXIMUM |
| SPECIFICATION/STANDARD DATA | 96906-MS27474 GOVERNMENT STANDARD |
| TEST DATA DOCUMENT | 81349-MIL-C-38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNEF |
| THREADED DEVICE TYPE | BACK SHELL |