| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.425 INCHES NOMINAL |
| BODY STYLE | ANGLE SHAPE, EXTERNAL COUPLING |
| BUSHING ACCOMMODATION HOLE SHAPE | ROUND W/FLAT |
| CONNECTOR LOCKING METHOD | EXTERNALLY THREADED COUPLING NUT |
| CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626, HALF HARD, OR PHOSPHOR BRONZE IN ACCORDANCE WITH ASTM B139, HARD HARD FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM FREQUENCY RATING | 5.0 MEGAHERTZ SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 750.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | NONSTD SINGLE MATING END |
| CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204, TYPE 11 OR TYPE 1, CLASS 1, GRADE C. MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| ENVIRONMENTAL PROTECTION | SALT SPRAY PROOF AND SOLVENT RESISTANT AND VIBRATION RESISTANT AND THERMAL SHOCK RESISTANT |
| INCLUDED CONTACT TYPE | COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
| OVERALL DIAMETER | 0.185 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| OVERALL HEIGHT | 0.650 INCHES NOMINAL |
| OVERALL LENGTH | 0.688 INCHES NOMINAL |
| MATING END QUANTITY | 1 |
| MOUNTING FACILITY THICKNESS | 0.425 INCHES NOMINAL |
| NOMINAL THREAD SIZE | 0.910 INCHES |
| OPERATING TEMP RATING | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM |
| POLARIZATION METHOD | CONTACT |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL | GOLD |
| RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-N-290 FED SPEC SINGLE TREATMENT RESPONSE |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626, ALLOY 360, 1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | COPPER ALLOY |
| SHELL SURFACE TREATMENT | NICKEL |
| SHELL TYPE | SOLID |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.185 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| SUPPLEMENTARY FEATURES | MOUNTING METHOD - FLANGE AND THREADED BODY |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| TEST DATA DOCUMENT | 13499-357-0173 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNF |
| THREADED DEVICE TYPE | COUPLING FACILITY |