|
|
|
National Stock Number:
5935-01-382-8826
Federal Supply Class:
5935
National Item Identification Number:
013828826
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| M81659/29A20140 | 0U583 | SAE INTERNATIONAL | | M81659/29A20140 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE-AS81659/29 | 0U583 | SAE INTERNATIONAL | | MIL-C-81659/29 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY STYLE | STRAIGHT SHAPE | | CONTACT POSITION ARRANGEMENT STYLE | 32C2 SINGLE MATING END | | TERMINAL LOCATION | BACK SINGLE MATING END ALL CONTACT GROUPINGS | | TERMINAL TYPE | CRIMP SINGLE MATING END ALL CONTACT GROUPINGS | | INCLUDED CONTACT TYPE | COAXIAL SOCKET SINGLE MATING END 1ST CONTACT GROUPING | | ROUND SOCKET SINGLE MATING END 2ND CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 2 SINGLE MATING END 1ST CONTACT GROUPING | | 30 SINGLE MATING END 2ND CONTACT GROUPING | | MATING END QUANTITY | 1 | | OVERALL LENGTH | 2.320 INCHES MAXIMUM | | OVERALL HEIGHT | 2.032 INCHES MINIMUM AND | | 2.062 INCHES MAXIMUM | | OVERALL WIDTH | 1.985 INCHES MINIMUM AND | | 2.015 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.720 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.427 INCHES MINIMUM AND | | 1.447 INCHES MAXIMUM | | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.764 INCHES NOMINAL | | UNTHREADED MOUNTING HOLE DIAMETER | 0.118 INCHES MINIMUM AND | | 0.122 INCHES MAXIMUM | | CONNECTOR LOCKING METHOD | FRICTION | | SHELL TYPE | SOLID | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | CADMIUM AND | | CHROMATE | | INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE GLASS FILLED OR | | PLASTIC EPOXY OR | | PLASTIC PHENOLIC SINGLE MATING END | | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS | | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END ALL CONTACT GROUPINGS | | TEST DATA DOCUMENT | 81349-MIL-C-81659 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.032 GOLD GRAINS, TROY | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-81659/29 GOVERNMENT SPECIFICATION |
|
|