5935-01-367-9864 CONNECTOR,RECEPTACLE,ELECTRICAL Index 5935-01-367-9866 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-01-367-9865

Federal Supply Class:
5935

National Item Identification Number:
013679865

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.


Manufacturer Information:
M3450KS32-7P96906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-501581349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SAE-AS501510U583SAE INTERNATIONAL


Techincal Specification:
BODY STYLESTRAIGHT SHAPE, EXTERNAL COUPLING
CONTACT POSITION ARRANGEMENT STYLE32-7 SINGLE MATING END
TERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPECRIMP SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPEROUND PIN SINGLE MATING END ALL CONTACT GROUPINGS
INCLUDED CONTACT QUANTITY4 SINGLE MATING END 1ST CONTACT GROUPING
7 SINGLE MATING END 2ND CONTACT GROUPING
24 SINGLE MATING END 3RD CONTACT GROUPING
MATING END QUANTITY1
OVERALL LENGTH2.125 INCHES MAXIMUM
OVERALL HEIGHT2.250 INCHES NOMINAL
OVERALL WIDTH2.250 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT1.750 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH1.750 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.875 INCHES NOMINAL
UNTHREADED MOUNTING HOLE DIAMETER0.209 INCHES NOMINAL
CONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
THREADED DEVICE TYPEBACK SHELL AND
COUPLING FACILITY
THREAD SERIES DESIGNATORUNS
NOMINAL THREAD SIZE2.000 INCHES
THREAD CLASS2A
THREAD QUANTITY PER INCH18
THREAD DIRECTIONRIGHT-HAND
SHELL TYPESOLID
SHELL MATERIALALUMINUM ALLOY
SHELL SURFACE TREATMENTCADMIUM AND
CHROMATE
POLARIZATION METHODKEY, MULTIPLE KEY GROOVE
INSERT POSITION IN DEG0.0
INSERT MATERIALRUBBER SILICONE CLASS Q SINGLE MATING END
CONTACT REMOVABILITYREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT MAXIMUM CURRENT RATING IN AMPS22.0 SINGLE MATING END 1ST CONTACT GROUPING
41.0 SINGLE MATING END 2ND CONTACT GROUPING
22.0 SINGLE MATING END 3RD CONTACT GROUPING
CONTACT MATERIALCOPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENTGOLD AND
NICKEL SINGLE MATING END ALL CONTACT GROUPINGS
TEST DATA DOCUMENT81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
PRECIOUS MATERIALGOLD
PRECIOUS MATERIAL AND WEIGHT0.035 GOLD GRAINS, TROY
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
SPECIFICATION/STANDARD DATA96906-MS3450 GOVERNMENT STANDARD
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE96906
DEFINITIVE GOVERNMENT SPEC/STD REFERENCEM3450KS32-7P


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us