5935-01-325-7478, CONNECTOR,RECEPTACLE,ELECTRICAL

5935-01-325-7477 CONNECTOR,RECEPTACLE,ELECTRICAL

5935-01-325-7479 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-01-325-7478

Federal Supply Class:
5935

National Item Identification Number:
013257478

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

M81659/29A2-0010	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
M81659/29A20010	0U583	SAE INTERNATIONAL
SAE-AS81659/29	0U583	SAE INTERNATIONAL
MIL-C-81659/29	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

BODY STYLE	STRAIGHT SHAPE, FLUSH MOUNT
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	1.720 INCHES NOMINAL
CONNECTOR LOCKING METHOD	FRICTION
CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE	ERR-090 SINGLE MATING END
CONTACT REMOVABILITY	REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD SINGLE MATING END SINGLE CONTACT GROUPING
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	1.437 INCHES NOMINAL
ENVIRONMENTAL PROTECTION	THERMAL SHOCK RESISTANT AND HUMIDITY RESISTANT AND SHOCK RESISTANT AND CORROSION RESISTANT AND VIBRATION RESISTANT
GUIDE DESIGN AND LOCATION	D SHAPE PIN LEFT-HAND AND D SHAPE PIN CENTER AND D SHAPE PIN RIGHT-HAND AT 12:00 OCLOCK
INCLUDED CONTACT QUANTITY	40 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL DOCUMENT AND CLASSIFICATION	MIL-M-14,TY GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
INSERT MATERIAL	PLASTIC DIALLYL PHTHALATE SINGLE MATING END
OVERALL HEIGHT	2.032 INCHES MINIMUM AND 2.062 INCHES MAXIMUM
OVERALL LENGTH	0.885 INCHES MINIMUM AND 0.897 INCHES MAXIMUM
OVERALL WIDTH	1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM
MATING END QUANTITY	1
SHELL SURFACE TREATMENT	ANODIZE
SHELL TYPE	SOLID
POLARIZATION METHOD	GUIDE PIN/SOCKET
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD
PRECIOUS MATERIAL AND WEIGHT	0.040 GOLD GRAINS, TROY
PRECIOUS MATERIAL	GOLD
SHELL MATERIAL	ALUMINUM ALLOY
UNTHREADED MOUNTING HOLE DIAMETER	0.118 INCHES MINIMUM AND 0.122 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA	81349-MIL-C-81659/29 GOVERNMENT SPECIFICATION
TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT	81349-MIL-C-81659 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial