|
|
|
National Stock Number:
5935-01-317-5098
Federal Supply Class:
5935
National Item Identification Number:
013175098
Description:
BACKSHELL,ELECTRICAL CONNECTOR
Detail:
An item specifically designed to be placed around that portion of a CONNECTOR, RECEPTABLE, ELECTRICAL or CONNECTOR, PLUG, ELECTRICAL which contains the facilities for attaching wires or cables. It may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device. It may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions.
|
Manufacturer Information:
| M85049/9-66W | 0U583 | SAE INTERNATIONAL | | M85049/9-66W | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | SAE-AS85049/9 | 0U583 | SAE INTERNATIONAL | | MIL-C-85049/9 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M85049/9-66W | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M85049/9-66W | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE TO CONNECTOR END | 4.487 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE TO CABLE END | 4.551 INCHES NOMINAL | | BODY ANGLE IN DEG | 90.0 | | CABLE OPENING DIAMETER | 1.250 INCHES MINIMUM AND 1.625 INCHES MAXIMUM | | CABLE OPENING QUANTITY | 1 | | OVERALL WIDTH | 2.730 INCHES MINIMUM AND 2.770 INCHES MAXIMUM | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED COUPLING | | NOMINAL THREAD SIZE | 2.250 INCHES | | SIZE DESIGNATION | 40 | | SEAL TYPE | GROMMET AND PREFORMED PACKING | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-85049/9 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | ANGLE TYPE W/CLAMP | | SURFACE TREATMENT | CADMIUM | | TEST DATA DOCUMENT | 81349-MIL-C-85049 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNEF | | THREAD QUANTITY PER INCH | 16 |
|
|