|
|
|
National Stock Number:
5935-01-238-4651
Federal Supply Class:
5935
National Item Identification Number:
012384651
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 10-2612 REV A PIECE 89 | 28199 | L3 TECHNOLOGIES, INC. | | G-369TY2 | 28199 | L3 TECHNOLOGIES, INC. | | G369 TY 2 REV B | 28199 | L3 TECHNOLOGIES, INC. | | XMRA34PF1A010 | 81312 | WINCHESTER INTERCONNECT CORPORATION |
|
Techincal Specification:
| BODY STYLE | RECTANGULAR SHAPE | | CONTACT POSITION ARRANGEMENT STYLE | 34 SINGLE MATING END | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 34 SINGLE MATING END SINGLE CONTACT GROUPING | | MATING END QUANTITY | 1 | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.703 INCHES NOMINAL | | OVERALL WIDTH | 1.328 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.766 INCHES NOMINAL | | UNTHREADED MOUNTING HOLE DIAMETER | 0.125 INCHES NOMINAL | | CONNECTOR LOCKING METHOD | JACKSCREW-SOCKET | | THREADED DEVICE TYPE | COUPLING FACILITY | | THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD SIZE | 0.138 INCHES | | THREAD CLASS | 2A AND | | 2B | | THREAD QUANTITY PER INCH | 32 | | THREAD DIRECTION | RIGHT-HAND | | SHELL TYPE | SOLID | | SHELL MATERIAL | ALUMINUM | | SHELL SURFACE TREATMENT | ANODIZE | | POLARIZATION METHOD | SHELL AND | | JACKSCREW | | SHELL GUIDE TYPE AND LOCATION DESIGNATOR | A PIN | | INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE SINGLE MATING END | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM CURRENT RATING IN AMPS | 13.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.034 GOLD GRAINS, TROY | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD | | SPECIAL FEATURES | JACKSCREW TYPE-FEMALE AND LOCATION-RIGHT HANDANDJACKSCREW TYPE-MALE AND LOCATION-LEFT HAND |
|
|