| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.894 INCHES MINIMUM AND 0.894 INCHES MINIMUM AND 0.906 INCHES MAXIMUM0.906 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLINGSTRAIGHT SHAPE, EXTERNAL COUPLING |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.370 INCHES MINIMUM AND 1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM1.380 INCHES MAXIMUM |
| CONNECTOR LOCKING METHOD | BAYONET PINBAYONET PIN |
| CONTACT POSITION ARRANGEMENT STYLE | 24-155 SINGLE MATING END24-155 SINGLE MATING END |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.370 INCHES MINIMUM AND 1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM1.380 INCHES MAXIMUM |
| ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND MOISTURE PROOF AND SALT WATER RESISTANT AND SALT WATER RESISTANT AND SHOCK PROOF AND SHOCK PROOF AND VIBRATION PROOFVIBRATION PROOF |
| INSERT POSITION IN DEG | 50.0 AND 50.0 AND 160.0 AND 160.0 AND 190.0 AND 190.0 AND 225.0225.0 |
| OVERALL HEIGHT | 1.695 INCHES MINIMUM AND 1.695 INCHES MINIMUM AND 1.711 INCHES MAXIMUM1.711 INCHES MAXIMUM |
| OVERALL LENGTH | 1.332 INCHES MINIMUM AND 1.332 INCHES MINIMUM AND 1.382 INCHES MAXIMUM1.382 INCHES MAXIMUM |
| OVERALL WIDTH | 1.695 INCHES MINIMUM AND 1.695 INCHES MINIMUM AND 1.711 INCHES MAXIMUM1.711 INCHES MAXIMUM |
| MATING END QUANTITY | 11 |
| NOMINAL THREAD SIZE | 1.500 INCHES1.500 INCHES |
| POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAYKEYWAY OR MULTIPLE KEYWAY |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-26074,CLASS 3,GRADE A MIL SPEC SINGLE TREATMENT RESPONSEMIL-C-26074,CLASS 3,GRADE A MIL SPEC SINGLE TREATMENT RESPONSE |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-367,T-6 FED SPEC SINGLE MATERIAL RESPONSEQQ-A-367,T-6 FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY 6061ALUMINUM ALLOY 6061 |
| SHELL SURFACE TREATMENT | NICKELNICKEL |
| SHELL TYPE | SOLIDSOLID |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-81511/41 GOVERNMENT SPECIFICATION81349-MIL-C-81511/41 GOVERNMENT SPECIFICATION |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.130 INCHES MINIMUM AND 0.130 INCHES MINIMUM AND 0.160 INCHES MAXIMUM0.160 INCHES MAXIMUM |
| TEST DATA DOCUMENT | 81349-MIL-C-81511 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).81349-MIL-C-81511 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2A2A |
| THREAD DIRECTION | RIGHT-HANDRIGHT-HAND |
| THREAD QUANTITY PER INCH | 2828 |
| THREAD SERIES DESIGNATOR | UNUN |
| THREADED DEVICE TYPE | BACK SHELLBACK SHELL |