|
|
|
National Stock Number:
5935-01-120-8605
Federal Supply Class:
5935
National Item Identification Number:
011208605
Description:
DUMMY CONNECTOR,RECEPTACLE
Detail:
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
|
Manufacturer Information:
| M83723/61-210A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-83723/61 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-83723/61 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.708 INCHES MINIMUM AND 0.728 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.719 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.719 INCHES NOMINAL | | ENVIRONMENTAL PROTECTION | HUMIDITY RESISTANT AND SALT WATER RESISTANT AND SHOCK PROOF AND VIBRATION PROOF | | OVERALL HEIGHT | 0.937 INCHES NOMINAL | | OVERALL LENGTH | 1.050 INCHES MINIMUM AND 1.090 INCHES MAXIMUM | | OVERALL WIDTH | 0.937 INCHES NOMINAL | | MATING END QUANTITY | 1 | | NOMINAL THREAD SIZE | 0.625 INCHES | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | ANODIZE | | SHELL TYPE | SOLID | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-83723/61 GOVERNMENT SPECIFICATION | | UNTHREADED MOUNTING HOLE DIAMETER | 0.116 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | TEST DATA DOCUMENT | 81349-MIL-C-83723 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNEF | | THREADED DEVICE TYPE | BACK SHELL |
|
|