|
|
|
National Stock Number:
5935-01-117-3032
Federal Supply Class:
5935
National Item Identification Number:
011173032
Description:
DUMMY CONNECTOR,RECEPTACLE
Detail:
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
|
Manufacturer Information:
| 10-427405-219 | 77820 | AMPHENOL CORP | | 1107-001-21 | 59976 | AERO-ELECTRIC CONNECTOR, INC. | | 650FS001NF21 | 06324 | GLENAIR, INC. | | G8472-21-N | 06324 | GLENAIR, INC. | | 12311882-1 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | DRP07A21S | 24805 | ESC TECHNOLOGIES INC | | LE482-0037-3021 | 43999 | THE BOEING COMPANY | | ST5M1402-21 | 76301 | THE BOEING COMPANY | | M38999/9-21B | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M38999/921B | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-38999 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-38999 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-38999/9 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.697 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.375 INCHES NOMINAL | | CONNECTOR LOCKING METHOD | BAYONET PIN | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.375 INCHES NOMINAL | | ENVIRONMENTAL PROTECTION | SALT WATER RESISTANT | | OVERALL LENGTH | 0.802 INCHES MINIMUM AND 0.837 INCHES MAXIMUM | | OVERALL WIDTH | 1.688 INCHES NOMINAL | | MATING END QUANTITY | 1 | | OVERALL HEIGHT | 1.688 INCHES NOMINAL | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | CADMIUM | | SHELL TYPE | SOLID | | SPECIFICATION/STANDARD DATA | 81349-MIL-DTL-38999/9 GOVERNMENT SPECIFICATION | | TEST DATA DOCUMENT | 81349-MIL-DTL-38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | UNTHREADED MOUNTING HOLE DIAMETER | 0.123 INCHES MINIMUM AND 0.138 INCHES MAXIMUM |
|
|