|
|
|
National Stock Number:
5935-01-093-2508
Federal Supply Class:
5935
National Item Identification Number:
010932508
Description:
DUMMY CONNECTOR,RECEPTACLE
Detail:
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
|
Manufacturer Information:
| MIL-C-22992 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-22992 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS18062N24 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.859 INCHES MINIMUM AND 0.869 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.562 INCHES NOMINAL | | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.562 INCHES NOMINAL | | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND MOISTURE PROOF AND SHOCK RESISTANT AND VIBRATION PROOF | | INSERT POSITION IN DEG | 0.0 | | OVERALL HEIGHT | 1.980 INCHES MINIMUM AND 2.021 INCHES MAXIMUM | | OVERALL LENGTH | 1.037 INCHES MINIMUM AND 1.068 INCHES MAXIMUM | | OVERALL WIDTH | 1.980 INCHES MINIMUM AND 2.021 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | NOMINAL THREAD LENGTH | 0.672 INCHES | | NOMINAL THREAD SIZE | 1.750 INCHES | | SHELL SURFACE TREATMENT | OXIDE | | SHELL TYPE | SOLID | | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072 E-516 MIL SPEC SINGLE TREATMENT RESPONSE | | SHELL MATERIAL | ALUMINUM ALLOY | | UNTHREADED MOUNTING HOLE DIAMETER | 0.175 INCHES NOMINAL | | SPECIFICATION/STANDARD DATA | 96906-MS18062 GOVERNMENT STANDARD | | TEST DATA DOCUMENT | 81349-MIL-C-22992 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | DOUBLE STUB | | THREAD QUANTITY PER INCH | 10 | | THREADED DEVICE TYPE | COUPLING FACILITY |
|
|